Special features
The tipper body is raised and lowered by
pressing and holding the corresponding
buttons on the magnetic and portable remote
control situated on a support in the cab.
The tipper body is raised by the motor in the
electro-hydraulic unit.
The tipper body is lowered by a solenoid valve
that opens the fluid return of the ram.
A safety device prevents the tipper body from
dropping when it is not moving or is being
raised.
Tipper
•
•
Never drive with a drop panel lowered.
Ensure that there is no person or
obstacle nearby (below or above)
when unloading.
Never leave the tipper body raised
when not in use.
Always discharge the load with the
upper part of the rear drop panel
secured.
Observe the maximum payload on the
weight plate on the vehicle.
Check regularly that the suspension
is in good condition and that the tyres
are inflated to the recommended
pressures.
•
•
•
•
Safety recommendations
The tipper body is raised by an electro-
hydraulic unit powered by the vehicle's battery.
•
•
•
Distribute the load uniformly in the
tipper body.
Transport similar products that
discharge easily.
Never drive, even slowly, with the
tipper body raised.
Tip onto a surface that is flat
and hard: a surface that is
sloping or loose could cause
the centre of gravity to shift,
making the whole vehicle
unstable.
180
English 
