Driving
1. Selecting the limiter function.
2. Activation/deactivation of the function.
3. Programming a speed.
Programming a speed
A speed can be programmed without activating
the limiter but with the engine running.
To enter a speed higher than the previous one:
Speed limiter
The system prevents the vehicle
from exceeding the speed setting
programmed by the driver.
The function selection status and the
programmed speed are displayed in the
instrument panel screen.
Speed selection is made with the vehicle
stationary and the engine running or with
the vehicle moving and 2nd gear or higher
engaged.
The minimum speed that can be programmed
is 19 mph (30 km/h).
The vehicle responds to the driver's foot
pressure on the accelerator until resistance is
felt in the pedal, which signifies that the vehicle
has reached the programmed speed.
The speed limiter is a driving aid that
cannot, in any circumstances, replace the
need to observe speed limits or the need
for vigilance on the part of the driver.
F Move the control up (+).
A short press increases the speed by 1 mph
(km/h).
Holding it increases the speed in steps of
5 mph (km/h).
Selecting the function
However, pressing the pedal beyond this point
of resistance to the floor permits exceeding
the programmed speed. To resume use of
the limiter, simply reduce the pressure on
the accelerator pedal gradually and return to
a speed below the programmed speed.
F
Turn the ring fully downwards.
The speed limiter is selected but
is not yet active.
6
To enter a speed lower than the previous one:
The display indicates OFF and the last
programmed speed.
F Move the control down (-).
A short press decreases the speed by 1 mph
(km/h).
Holding it decreases the speed in steps of
5 mph (km/h).
99
English 
