Download User Manual App

Quickly access user manual for free!

In the event of a breakdown -> Changing a fuse for Your Peugeot Boxer Van Third Generation (2014-2025)

In the event of a breakdown  
Third brake lamp  
Changing a fuse  
Professional repairers: for full information  
on the fuses and relays, consult the  
wiring information and diagrams via the  
PEUGEOT dealer network.  
Type A, W5W – 5W (x 4)  
Removing and fitting a fuse  
Good  
Failed  
F Remove the two lamp fixing screws.  
F Remove the lamp by pulling it towards you.  
Before changing a fuse, the cause of the fault  
must be found and rectified. The numbers of  
the fuses are indicated on the fusebox.  
Always replace a faulty fuse with a fuse of  
the same rating.  
PEUGEOT accepts no responsibility for  
the cost incurred in repairing your vehicle  
or for rectifying malfunctions resulting  
from the installation of accessories not  
supplied by and not recommended by  
PEUGEOT and not installed in accordance  
with its specifications, in particular when  
the combined power consumption of all  
of the additional equipment connected  
exceeds 10 milliamperes.  
The three fuseboxes are located on the  
dashboard on the left-hand side, in the pillar  
on the right-hand side and in the engine  
compartment.  
The designations provided are only for the  
fuses that can be replaced by the user. For  
any other work, visit a PEUGEOT dealer or  
a qualified workshop.  
8
F Remove the bulb holder by squeezing the  
two tongues inwards.  
F Remove the failed bulb by pulling it out.  
F Change the bulb.  
149  

Related Topics