Ease of use and comfort
If your vehicle is fitted with separate
programmable heating, it gradually brings the
engine up to a good temperature to facilitate
starting.
An integrated clock permits programming of its
start time. The passenger compartment will be
heated more quickly.
The warm air diffused at floor level from the
front air conditioning unit is distributed at the
feet of the rear passengers of rows 2 and 3.
A warm air diffusion vent, located on the rear
left wheel arch, can supplement the unit for the
feet of the rear passengers in row 3.
Comfort temperature
adjustment
F
Turn the control to select
a position between blue
(cold) and red (hot) so as to
adjust the temperature to your
requirements.
3
The OFF control on the "Single zone"
central control panel switches off the
function.
However, a safety device will ventilate
the rear circuit automatically, even if
the control is in position 0, to prevent
condensation forming.
This also facilitates passenger
compartment heating, demisting and
defrosting.
Activation/Deactivation
F
From the driver's seat, press
this button on the MODE control
panel to activate the operation
of the rear controls. The
Digital programming control
indicator lamp comes on.
The programmable heating control panel is
located to the side of the steering wheel below
the MODE control panel.
Pressing this button again deactivates the rear
controls. The indicator lamp goes out.
Programmable additional
heating
Time display
Air flow
Heating cycle indicator
Time setting and reading indicator
F
Turn the control to your chosen
position to obtain sufficient air
flow for your comfort.
47
English 
