In the event of a breakdown
Repairing a tyre
Temporary puncture
repair kit
F Apply the parking brake.
This temporary puncture repair kit is kept
in a bag and stowed in one of the front door
pockets.
F Unscrew the tyre valve cap, remove the
filling hose B and screw the ring E onto the
valve.
It consists of:
-
a cartridge A, containing the sealant fluid,
equipped with:
•
•
a filling hose B,
F Insert the connector G into the nearest
power socket on the vehicle.
F Switch on the compressor by placing the
switch F in position I (on),
F Inflate the tyre to a pressure of 5 bar.
To obtain a more accurate reading, you are
advised to check the pressure value on the
pressure gauge H, with the compressor off.
an adhesive sticker C showing "max.
50 mph (80 km/h)" that the driver
must apply in a visible place (on the
dashboard) after having repaired the tyre,
8
-
-
a quick guide to use of the repair kit,
a compressor D equipped with a pressure
gauge and unions,
F Check that the switch F on the compressor
is in position 0 (off).
-
adaptors, for the inflation of various items.
F Start the engine.
135
English 
