Lighting and visibility
up to approximately 3 minutes. When this
time has elapsed, the lamps are switched off
automatically.
Deactivate this control by keeping the stalk
pulled towards the steering wheel for more than
2 seconds.
For more information on Vehicle
configuration, refer to the corresponding
section.
F Flash the headlamps (going beyond the
point of resistance) to activate the function.
Operation
Adaptive lighting
System which automatically changes to main
beam according to the ambient light level and
the driving conditions, using a camera located
at the top of the windscreen.
4
This system is a driving aid.
The driver remains responsible for the
vehicle's lighting, its correct use for the
prevailing conditions of light, visibility
and traffic, and observation of driving
regulations.
Once activated, the system operates as
follows:
If the ambient light level is sufficient and/or if
the traffic conditions do not allow illumination of
the main beam headlamps:
Activation
F
Turn the lighting control stalk
ring to this position.
-
Dipped beam is maintained; this
indicator lamp lights up in the
instrument panel.
F Activate the function with the MODE button;
in the "Automatic headlamp dipping" menu,
select "ON".
63
English 
