Dashboard instruments
Level 2 display screen
Brightness of instruments
and controls
Warning and indicator
lamps
Visual indicators informing the driver
that a system is in operation (operation
or deactivation indicator lamps) or of the
occurrence of a fault (warning lamps).
When the ignition is switched on
In the left-hand part:
Certain warning lamps come on for a few
seconds when the vehicle's ignition is switched
on.
When the engine is started, these same
warning lamps should go off.
-
-
-
-
Time,
Exterior temperature,
Warning or indicator lamps,
Cruise control or speed limiter.
If they remain on, before moving off refer to the
information on the warning lamp concerned.
In the right-hand part:
-
-
-
Date,
Service indicator,
Trip computer (range, fuel consumption,
etc.),
The instruments and controls can be adjusted
for brightness by pressing the MODE button,
with the sidelamps on.
For more information on Vehicle
configuration, refer to the corresponding
section.
Associated warnings
Certain warning lamps may come on in one of
two modes: fixed (continuous) or flashing.
Only by relating the type of lighting to the
operating status of the vehicle can it be
ascertained whether the situation is normal or
whether a fault has occurred.
-
-
-
-
-
Alert messages,
System status messages,
Vehicle configuration,
Headlamp beam height,
Miles/kilometres travelled.
In the event of a fault, the illumination of the
warning lamp may be accompanied by an
audible signal and/or a message.
8
English 
