Practical information
Outside
Bonnet
Opening
Before doing anything under the bonnet,
deactivate the Stop & Start system to
avoid the risk of injury related to an
automatic change to START mode.
Inside
This operation must only be carried out with the
vehicle stationary and the driver's door open.
F Unclip the stay and tilt it to insert it in the
first notch, then the second.
F Push up the safety catch located above the
grille and raise the bonnet.
Because of the presence of electrical
equipment under the bonnet, it is
recommended that exposure to water
(rain, washing, etc.) be limited.
Do not open the bonnet in very windy
conditions.
When the engine is hot, handle the safety
catch and stay with care (risk of burns).
7
Closing the bonnet
F Before closing the bonnet, put the stay back
in its housing.
F Lower the bonnet and release it at the end
of its travel. Check that the bonnet is locked.
F Pull towards you the release lever located
on the side of the dashboard.
125
English 
