Ease of use and comfort
The passenger compartment heating is brought
up to temperature more rapidly.
This system must be programmed to start up
before you enter the vehicle.
Air outlet
Rear heating and/or air
conditioning
Press this control to activate
extraction of air to the outside; the
LED comes on. Press again to
switch off.
Automatic additional
heating
Air intake
This is an additional system which starts
automatically when the ignition is switched
on. Its activation depends on the exterior
temperature and the temperature inside the
vehicle.
Pressing this control activates the
exterior air intake into the passenger
compartment; the LED comes on.
Press again to switch off.
It switches off automatically once the heating
system is started manually.
Additional heating
systems
Supplementary heating
Additional heating
This is passenger compartment heating,
additional to the standard equipment.
It can operate independently of the engine.
On the 2-3 seats model, this is located under
the seat on the driver's side with air diffusion
directed forwards.
On the 5-9 seats model, it is
located at the rear. Depending
on the model, the air diffusion
is either direct from the rear
or comes from the rail located
under each of the two rows of
seats.
Additional heater or
programmable additional
heating
If your vehicle is fitted with an additional air
conditioning unit, located in the rear of the
vehicle: the distribution rail located in the
roof and the individual diffusion vents provide
a perfect diffusion of cold air.
This is an additional, programmable and
separate system which heats the Diesel engine
hot coolant loop to make starting easier.
It improves the demisting and defrosting
performance and that of the heated seats, if
fitted to the vehicle.
F
Press this control to activate/
deactivate the heating. The
LED comes on if the heating is
activated.
When rapid demisting and defrosting is
required, switch off the control.
46
English 
