CAUTION
4WD MODE OPERATIONS
Depending on the driving conditions, the 4WD
mode may automatically change from 2WD to
4WD even when the 2WD mode is selected.
4WD mode
indicator light
4WD Mode
Wheels driven
Driving conditions
Do not start the engine while in the 2WD, AUTO,
or LOCK mode:
(
m
,
m
)
Front wheels-
The wheel drive mode is in
2WD when driving on a normal
road
When on free-roller or jacking the front tyres
with the rear tyres on the ground.
•
2WD
Goes off
For driving on dry, paved roads
When towing with the rear tyres raised from
the ground.
•
Distribution of torque to the
front and rear wheels changes
automatically, depending on
road conditions encountered
[ratio; 100:0 (2WD) → 50:50
(4WD)]. This results in
4WD SHIFT TIPS
AUTO
LOCK
For driving on paved or slippery roads
For driving on rough roads
If the 4WD mode control is operated while cor-
•
m
nering, accelerating or decelerating, or if the ig-
nition is turned OFF while in the AUTO or LOCK
position you may feel a jolt - this is normal.
improved driving stability
Four wheels*1
m
/
m
The oil temperature of power train parts will in-
•
crease if the vehicle is continuously operated
under conditions where the difference in rotation
between the front and rear wheels is large (wheel
slip), such as when driving the vehicle on rough
roads through sand or mud, or when freeing a
stuck vehicle. In these cases, the 4WD warning
light blinks rapidly, and the 4WD mode changes
to the 2WD condition to protect the power train
parts. If you stop the vehicle, with the engine
idling, and wait until the warning light stops blink-
ing the 4WD mode returns to the AUTO mode.
*1
LOCK mode changes to AUTO mode automatically when the vehicle is sharply accelerated or when the vehicle speed
is over approximately 40 km/h (25 MPH). The 4WD LOCK indicator light goes off. Turning off the ignition automatically
cancels LOCK mode.
Braking distance in 4WD mode is the same as in
2WD mode.
•
Starting and driving 5-25
Downloaded from manuals search engine