unlock the steering wheel, insert the ignition key and
turn it gently while rotating the steering wheel slightly
right and left.
When the key cannot be turned toward the LOCK
position, proceed as follows to remove the key:
Acc (Accessories) (2)
This position activates electrical accessories, such
as the radio, when the engine is not running.
1. Move the selector lever into the P (Park) posi-
tion.
The ignition key can only be removed when the
switch is in the LOCK position (Normal parking po-
sition) (0).
ON (Normal operating position) (3)
2. Turn the key slightly in the ON direction.
3. Turn the key towards the LOCK position.
4. Remove the key.
This position turns on the ignition system and elec-
trical accessories.
AUTOMATIC TRANSMISSION OR
CONTINUOUSLY VARIABLE
TRANSMISSION
START (4)
STEERING LOCK
The engine starter activates and the engine will start.
As soon as the engine has started, release the key
immediately. It will return to the ON position.
On Automatic Transmission (AT) or Continuously
Variable Transmission (CVT) models, the ignition
lock is designed so that the key cannot be turned to
LOCK and removed until the selector lever is moved
to the P (Park) position.
To lock the steering wheel
1. Turn the key to the LOCK position.
2. Remove the key from the ignition switch.
NOTE
For vehicles fitted with Stop/Start System:
3. Turn the steering wheel 1/6 of a turn clockwise
from the straight up position.
When the engine is automatically stopped by the
Stop/Start System the ignition switch can still be
operated as usual.
When removing the key from the LOCK position of
the ignition switch, make sure that the selector lever
is in the P (Park) position.
To unlock the steering wheel
1. Insert the key into the ignition switch.
At the end of a journey turn the ignition OFF to
avoid a flat battery. The Stop/Start System does
not automatically turn ignition off.
The selector lever can only be moved from the P
(Park) position when the ignition switch is in the ON
position and the footbrake pedal is depressed.
2. Gently turn the key while rotating the steering
wheel slightly right and left.
To remove the key from the ignition switch:
NISSAN ANTI-THEFT SYSTEM (NATS)
KEY POSITIONS
1. Move the selector lever into the P (Park) posi-
tion.
The NISSAN Anti Theft System (NATS)* will stop
the engine if someone tries to start the engine with-
out using the registered NATS key.
LOCK (Normal parking position) (0)
The ignition key can only be removed when in this
position.
2. Turn the key to the LOCK position.
* Immobilizer
3. Remove the key from the ignition switch.
The steering lock can only be locked in this position.
If you failed to start the engine using the NATS Key,
turn the ignition knob to the LOCK position, wait for
5 seconds and turn the key to the START position
again to start the engine.
If the key is removed from the ignition switch, the
selector lever cannot be moved from the P (Park)
position.
“OFF” (1)
The engine is turned off without locking the steering
wheel.
Starting and driving 5-7
Downloaded from manuals search engine