On AT or CVT models, when the ignition knob can-
not be turned to the LOCK position, proceed as fol-
lows:
Slide the locking pin to the unlock position.
Remove the Intelligent Key cap as illustrated.
Unfold the key jA .
j1
j2
j3
j4
Remove the ignition knob key slot cap with a
suitable tool.
Insert the emergency key jA into the ignition
switch as illustrated.
j5
j6
j7
Move the selector lever to the P (Park) posi-
tion.
Turn the emergency key slightly in the ON
direction.
Turn the emergency key to the LOCK position.
Remove the emergency key.
j8
j9
If the key is removed from the ignition switch, the
selector lever cannot be moved from P (Park). The
selector lever can only be moved from the P
(Park) position when the ignition knob is in the
ON position and the footbrake pedal is
depressed.
NSD291
Remove the ignition knob key slot cap with a
suitable tool.
j4
j5
j6
EMERGENCY KEY – INTELLIGENT
KEY DEAD BATTERY SITUATION
NISSAN ANTI-THEFT SYSTEM (NATS)
Insert the emergency key jA into the ignition
Slide the locking pin to the unlock position.
Remove the Intelligent Key cap as illustrated.
Unfold the key jA .
j1
j2
j3
The NISSAN Anti-Theft System (NATS)* will stop
the engine if someone tries to start the engine with-
out the registered Intelligent Key.
switch as illustrated.
Proceed with the emergency key as described
in “Ignition switch” earlier in this section.
* Immobilizer
5-10 Starting and driving
Downloaded from manuals search engine