2006-2014 Nissan Qashqai SUV Starting and driving -> Driving with automatic transmission or with continuously variable transmission (Models with manual shift) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Starting and driving -> Driving with automatic transmission or with continuously variable transmission (Models with manual shift) for Your Nissan Qashqai SUV First Generation (2006-2014)

or the ultra sonic parking sensor (where fitted) will  
be activated. For details, see “Rear-view monitor  
(where fitted)” in the “4. Display screen, heater and  
air conditioner, and audio system” section, “Around  
view monitor (where fitted)” in the “4. Display  
screen, heater and air conditioner, and audio  
system” section or “Ultrasonic Parking Sensor  
(where fitted)” later in this section.  
selector position. If it does, have your vehicle  
checked by a NISSAN dealer or qualified  
workshop.  
Make sure that the selector lever is in the  
desired position. Use the D (Drive), or Manual  
shift mode to move forwards and the R (Re-  
verse) to move backwards. Release the hand-  
brake lever and the footbrake pedal, then de-  
press the accelerator pedal to start the vehicle  
in motion and merge with traffic (avoid abrupt  
starting and spinning the wheels).  
Do not depress the accelerator pedal while  
shifting from P (Park) or N (Neutral) to R (Re-  
verse), D (Drive) or Manual shift modes posi-  
tion. Always depress the brake pedal until  
shifting is completed.  
•
•
If it is difficult to move the gear lever into R (Re-  
verse) or 1st. Shift into N (Neutral), then release the  
clutch pedal. Fully depress the clutch pedal again  
and shift into R (Reverse) or 1st.  
Avoid revving up the engine while the vehicle  
is stopped, this could cause unexpected ve-  
hicle movement [if the selector lever is in the  
R (Reverse), D (Drive), or Manual shift mode  
position] or damage the engine [if the selec-  
tor lever is in the N (Neutral) or P (Park) posi-  
tion].  
•
On an uphill grade, do not hold the vehicle by  
depressing the accelerator pedal. The foot-  
brake should be used for this purpose, in or-  
der to hold the vehicle in place and to prevent  
overheating of the transmission.  
DRIVING WITH AUTOMATIC  
TRANSMISSION OR WITH  
CONTINUOUSLY VARIABLE  
TRANSMISSION (Models with manual  
shift)  
Shift into the N (Neutral) position and apply  
the handbrake when at a standstill for longer  
than a short waiting period.  
•
•
WARM THE ENGINE UP  
•
•
Due to the higher idle speeds when the en-  
gine is cold, extra caution must be taken when  
shifting the selector lever into the driving po-  
sition immediately after starting the engine.  
Keep the engine at idling speed while shifting  
from the N (Neutral) position to any driving  
position.  
CAUTION  
The cold engine idle speed is high, so use  
caution when shifting into a forward or re-  
verse gear before the engine has warmed up.  
•
CAUTION (when starting the vehicle):  
PARKING THE VEHICLE  
DEPRESS THE FOOTBRAKE PEDAL  
•
Depress the footbrake pedal and, once the  
vehicle stops, move the selector lever into the  
P (Park) position, pull the handbrake lever and  
release the footbrake pedal.  
Avoid revving up the engine while the vehicle  
is stopped. This could cause unexpected ve-  
hicle movement.  
When the engine is running, shifting the se-  
lector lever into the R (Reverse), D (Drive) or  
Manual shift mode position without depress-  
ing the brake pedal causes the vehicle to  
move slowly. Be sure the brake pedal is fully  
depressed and the vehicle is stopped, before  
shifting the selector lever.  
•
Driving precautions  
Never shift to P (Park) or R (Reverse) while  
Starting the vehicle  
•
1. After starting the engine, fully depress the foot-  
brake pedal before shifting the selector lever from  
P (Park) to R (Reverse), D (Drive) or Manual shift  
mode.  
the vehicle is moving, this could result in dam-  
age to the transmission.  
BE AWARE OF THE SELECTOR LEVER POSI-  
TION  
•
Start the engine in the P (Park) or N (Neutral)  
position. The engine will not start in any other  
•
5-14 Starting and driving  
Downloaded from manuals search engine  
2. Keep the footbrake pedal depressed and push  
the selector lever button to shift into a driving  
gear.  
and air conditioner, and audio system” section,  
“Around view monitor (where fitted)” in the “4. Dis-  
play screen, heater and air conditioner, and audio  
system” section or “Ultrasonic Parking Sensor  
(where fitted)” later in this section.  
Push the button while depressing the  
brake pedal.  
Push the button to shift.  
3. Release the handbrake and footbrake, then  
gradually start the vehicle in motion by pressing  
the accelerator pedal.  
Shift without depressing the brake  
pedal.  
N (Neutral):  
Neither forward nor reverse gear is engaged. The  
engine can be started in this position. You may shift  
to N and restart a stalled engine while driving the  
vehicle.  
The automatic transmission or continuously variable  
transmission is designed so that the footbrake pedal  
MUST be depressed before shifting from P (Park)  
to any drive position while the ignition switch is ON.  
Push the button to shift into P (Park) or R (Reverse).  
All other positions can be selected without pushing  
the button.  
P (Park):  
D (Drive):  
Use this position when the vehicle is parked or when  
starting the engine. Always make sure that the ve-  
hicle is completely stopped before moving the se-  
lector lever into the P (Park) position. For maximum  
safety, the footbrake pedal must be depressed be-  
fore moving the selector lever into the P (Park) posi-  
tion. Use this position together with the handbrake.  
When parking on a hill, first depress the footbrake  
pedal, apply the handbrake and then shift into the P  
(Park) position.  
Use this position for all normal forward driving.  
NSD323Z  
R (Reverse):  
CAUTION  
NIC1649  
Shifting  
LHD models  
jA  
jB  
Shift into this position only after the vehicle has  
completely stopped.  
Gear shift indicator:  
RHD models  
The gear shift indicator jA located in the lower part  
of the vehicle information display shows the current  
position of the transmission.  
To move the selector lever:  
Use this position to reverse the vehicle.  
When the selector lever is in the R (Reverse) posi-  
tion, either the NISSAN Connect monitor (where fit-  
ted) or the ultra sonic parking sensor (where fitted)  
will be activated. For details, see “Rear-view moni-  
tor (where fitted)” in the “4. Display screen, heater  
It shows the P,R,N,D modes when the transmission  
is in auto mode. It shows the gear number when the  
transmission is in manual mode.  
Starting and driving 5-15  
Downloaded from manuals search engine  
When cancelling manual shift mode, return the  
selector lever to the D (Drive) position. The trans-  
mission returns to the normal driving mode.  
•
•
Manual shift mode  
When the selector lever is shifted from D (Drive) to  
the manual shift gate with the vehicle stopped or  
while driving, the transmission enters manual shift  
mode. Shift range can be selected manually.  
In manual shift mode, the transmission may  
not shift to the selected gear under certain  
circumstances. This helps maintain driving  
performance and reduces the chance of ve-  
hicle damage or loss of control.  
In manual shift mode, the selected gear is displayed  
on the position indicator in the combination meter.  
Shift ranges up or down one by one as follows:  
If the engine is revving up to a hazardous  
speed in manual shift mode, the transmission  
may shift up automatically. When the vehicle  
speed decreases, the transmission automati-  
cally shifts down and shifts to 1st gear before  
the vehicle comes to a stop.  
•
NSD347  
1st ⇔ 2nd ⇔ 3rd ⇔ 4th ⇔ 5th ⇔ 6th  
Cap (where fitted)  
When shifting up, move the selector lever to the  
+ (up) side. (Shifts to higher range).  
•
Shift lock release  
If the battery is discharged, the selector lever can-  
not be moved from the P (Park) position even with  
the brake pedal depressed and the ignition switch in  
the ON position.  
When shifting down, move the selector lever to  
the – (down) side. (Shifts to lower range).  
•
Accelerator downshift – In the D (Drive)  
position  
Moving the selector lever rapidly to the same  
side twice will shift the ranges in succession.  
•
For rapid passing or driving uphill, fully depress the  
accelerator pedal to the floor. This shifts the trans-  
mission down into a lower gear, depending on the  
vehicle speed.  
To move the selector lever, remove the cap j1  
(where fitted) then push the shift lock release button  
jA with a suitable tool j2 (as illustrated) and press  
the selector lever button j3 . It is now possible to  
move the selector lever to the N (Neutral) position  
j4 .  
Use the 1st position when driving slowly on steep  
•
hills, slow driving through deep snow, sand or  
mud, or for maximum engine braking on steep  
downhill grades.  
Use the 2nd, 3rd or 4th position when driving  
steep hills or for engine braking on steep down-  
hill grades.  
•
For your safety, make sure the handbrake is applied  
and the brake pedal is depressed during the opera-  
tion.  
Use the 5th position for driving up or down long  
slopes.  
•
If there is any problem moving the lever out of the P  
(Park) position, have a NISSAN dealer or qualified  
workshop to check the automatic transmission sys-  
tem as soon as possible.  
Use the 6th position for all normal forward driv-  
ing. However, you need to shift down the gears  
when accelerating or passing another vehicle.  
•
5-16 Starting and driving  
Downloaded from manuals search engine  

Related Topics

Running-in schedule Before starting the engine Precautions when starting and driving Exhaust gas (Carbon Monoxide) On-pavement and off-road driving precautions Three-way catalyst (Petrol engine models) To help prevent damage Turbocharger system (Diesel engine models) Diesel Particulate Filter (DPF) (where fitted) Regeneration restrictions If regeneration fails Care when driving Engine cold start period Loading luggage Driving on wet roads Driving under winter conditions Ignition switch Automatic transmission or Continuously variable transmission Steering lock Key positions Ignition knob (where fitted) Manual transmission Ignition knob position Emergency key ? Intelligent Key dead battery situation NISSAN Anti-Theft System (NATS) Starting the engine Driving the vehicle Driving with manual transmission Driving with Continuously Variable Transmission (CVT) (Models without manual shift) Stop/Start System (where fitted) Normal operation Precautions Stop/Start System OFF switch Environmental savings Ultrasonic Parking Sensor (where fitted) Four-wheel Drive (4WD) (where fitted) 4WD mode operations 4WD shift tips 4WD Warning light 4WD Mode indicator lights Driving four-wheel drive (4WD) safely Cruise control (where fitted) Precautions on cruise control Cruise control system operations Speed limiter Speed limiter operations Parking Trailer towing Operating precautions Tyre pressure Safety chains Trailer brakes Trailer detection (where fitted) Installation of coupling device Vehicle security Power steering system Brake system Brake precautions Anti-lock Braking System (ABS) Electronic Stability Programme (ESP) system (where fitted) Electronic Stability Programme (ESP) OFF switch Cold weather driving Battery Engine coolant Tyre equipment Special winter equipment Corrosion protection

Popular Owner Manuals