When the engine is stopped the following informa-
tion is displayed for a few seconds.
•
•
Push and hold
the steering
wheel ji button
to reset the
[CO2 Saved]
value.
The display can
be switched
between Stop/
Start System
information and
drive computer
information by a
short press of
the steering
The message can
only be cleared by
turning the ignition
OFF (or restarting
the engine).
See “Vehicle information display” in the “2. Instru-
ments and controls” section for information about
the display.
NOTE
Automatic engine
restart is possible
whenever the
m
PRECAUTIONS
Stop/Start System
symbol is
The following message is displayed when there may
be something wrong with the Stop/Start System.
You are advised to have the system checked by a
NISSAN dealer or qualified workshop.
m
illuminated at the
bottom of the
m
display.
wheel ji button
The message can
be cleared by
Whilst the engine remains stopped the vehicle infor-
mation display shows the accumulated quantity (es-
timate) of carbon dioxide exhaust emissions pre-
vented by the Stop/Start System.
When automatic restart is not possible the following
information is displayed. The engine must be started
by turning the ignition switch.
pressing the steer-
ing wheel ji button
NOTE
The Stop/Start
The message can
be cleared by
System symbol at
the bottom of the
display flashes
pressing the steer-
ing wheel ji but-
ton, restarting the
engine, or turning
the ignition OFF.
m
whilst the fault
condition remains.
m
The following information is displayed and a buzzer
sounded to remind the driver to turn the ignition
OFF to avoid a flat battery
5-22 Starting and driving
Downloaded from manuals search engine