2006-2014 Nissan Qashqai SUV Starting and driving -> Cruise control (where fitted) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Starting and driving -> Cruise control (where fitted) for Your Nissan Qashqai SUV First Generation (2006-2014)

CRUISE CONTROL (where fitted)  
The cruise control system allows driving at constant  
speeds without keeping your foot on the accelerator  
pedal.  
When the cruise control system is on the speed lim-  
iter cannot be operated.  
The cruise control system operation switches are  
located on the steering wheel (right side).  
WARNING  
The cruise control system ONLY maintains a  
constant vehicle speed, it does not replace  
the driver.  
•
Always observe the posted speed limits and  
do not set the speed above them.  
•
NSD375  
Do not use the cruise control system when  
•
CRUISE indicator  
Cruise control symbol  
SET indicator  
6.  
7.  
8.  
9.  
driving under the following conditions. Doing  
so could cause a loss of vehicle control and  
result in an accident.  
NSD373  
–
When it is not possible to keep the vehicle  
at a constant speed  
Set speed value  
RES (Resume) switch  
SET switch  
1.  
2.  
3.  
4.  
The cruise control system operating condition is  
shown in the vehicle information display. For details,  
see “Cruise control/Speed limiter indicator (where  
fitted)” in the “2. Instruments and controls” section.  
–
–
–
–
–
When driving in heavy traffic  
CANCEL switch  
When driving in traffic that varies speed  
When driving in windy areas  
Speed limiter main “ON/OFF” switch (For  
details, see “Speed limiter” later in this sec-  
tion)  
PRECAUTIONS ON CRUISE  
CONTROL  
When driving on winding or hilly roads  
When driving on slippery (rain, snow, ice,  
etc.) roads  
Cruise control main “ON/OFF” switch  
5.  
The cruise control system will be automatically  
•
cancelled when there is a malfunction. Have the  
system checked by a NISSAN dealer or quali-  
fied workshop.  
CAUTION  
On manual transmission models, do not shift into  
N (Neutral) without depressing the clutch pedal  
when the cruise control is set. Should this occur,  
depress the clutch pedal and turn the cruise con-  
trol main switch off immediately. Failure to do so  
may cause engine damage.  
To properly set the cruise control system, per-  
form the steps as described in “Cruise control  
system operations” later in this section.  
•
Starting and driving 5-29  
Downloaded from manuals search engine  
4. Take your foot off the accelerator pedal.  
The vehicle will maintain the set speed.  
2 km/h or 1 MPH for M9R diesel models  
CRUISE CONTROL SYSTEM  
OPERATIONS  
Push and hold the RES (resume) j1 switch up-  
wards or the SET switch j2 downwards. The  
vehicle speed will increase or decrease to the  
new set speed.  
•
The cruise control system can be set at the follow-  
ing speeds:  
If the vehicle speed is less than the minimum set  
speed (see table), it will not be possible to set  
the cruise control system.  
Minimum  
speed  
Engine type  
Maximum speed  
The new set speed value j9 will be displayed in the  
combination meter.  
Changing a cruising speed  
1.6 petrol  
HR16DE  
MT: 170 km/h (100 MPH)  
CVT: 155 km/h (95 MPH)  
Use any one of the following methods to change the  
cruising speed.  
45 km/h  
Passing another vehicle  
(30 MPH)  
2.0 petrol  
MR20DE  
MT: 185 km/h (110 MPH)  
CVT: 175 km/h (105 MPH)  
Depress the accelerator pedal to accelerate. After  
releasing the accelerator pedal, the vehicle will re-  
turn to the previously set speed.  
Slow the vehicle as normal using the footbrake  
pedal, the SET indicator j8 in the combination  
•
1.5 diesel  
K9K  
30 km/h  
(20 MPH)  
166 km/h (70 MPH)  
170 km/h (106 MPH)  
190 km/h (119 MPH)  
meter will be turned off.  
2.0 diesel  
M9R  
30 km/h  
(18 MPH)  
The set speed value j9 will flash until the vehicle  
returns to the previously set speed.  
When the vehicle reaches the desired cruising  
speed, push and release the SET switch j2  
downwards.  
1.6 diesel  
R9M  
40 km/h  
(25 MPH)  
Cancelling the cruise control system  
The new set speed value j9 and SET indicator  
j8 will be displayed in the combination meter.  
To cancel a set speed limit, push the CANCEL  
switch j3 . The SET indicator j8 in the combination  
meter will be turned off.  
Turning the cruise control system on  
The cruise control system can be switched on after  
engine start or when driving.  
Press the accelerator pedal.  
•
The set speed value j9 will remain displayed, as  
this speed is now stored in the cruise control sys-  
tem memory.  
When the vehicle reaches the desired cruising  
speed, push and release the SET switch j2  
downwards.  
Push the cruise control main switch j5 . The  
CRUISE indicator and the cruise control symbol j7  
will illuminate in the combination meter display.  
The cruise control system will also be cancelled  
automatically by any of the following:  
The new set speed value j9 and SET indicator  
j8 will be displayed in the combination meter.  
Setting a cruising speed  
Pressing the footbrake pedal.  
•
•
•
1. Accelerate to the desired cruising speed.  
Push and release the RES (resume) j1 switch  
upwards or the SET switch j2 downwards to  
increase or decrease the set speed in steps of:  
•
Pressing the clutch pedal.  
2. Push the SET switch j2 downwards and release  
it.  
Moving the gear lever (MT models) or selector  
lever (AT or CVT models) to the N (Neutral) posi-  
tion.  
1 km/h or 1 MPH for petrol models or R9M die-  
sel models  
3. The SET indicator j8 and the set speed value  
j9 will be displayed in the combination meter  
display.  
2 km/h or 2–3 MPH K9K diesel models  
5-30 Starting and driving  
Downloaded from manuals search engine  

Related Topics

Running-in schedule Before starting the engine Precautions when starting and driving Exhaust gas (Carbon Monoxide) On-pavement and off-road driving precautions Three-way catalyst (Petrol engine models) To help prevent damage Turbocharger system (Diesel engine models) Diesel Particulate Filter (DPF) (where fitted) Regeneration restrictions If regeneration fails Care when driving Engine cold start period Loading luggage Driving on wet roads Driving under winter conditions Ignition switch Automatic transmission or Continuously variable transmission Steering lock Key positions Ignition knob (where fitted) Manual transmission Ignition knob position Emergency key ? Intelligent Key dead battery situation NISSAN Anti-Theft System (NATS) Starting the engine Driving the vehicle Driving with manual transmission Driving with automatic transmission or with continuously variable transmission (Models with manual shift) Driving with Continuously Variable Transmission (CVT) (Models without manual shift) Stop/Start System (where fitted) Normal operation Precautions Stop/Start System OFF switch Environmental savings Ultrasonic Parking Sensor (where fitted) Four-wheel Drive (4WD) (where fitted) 4WD mode operations 4WD shift tips 4WD Warning light 4WD Mode indicator lights Driving four-wheel drive (4WD) safely Precautions on cruise control Cruise control system operations Speed limiter Speed limiter operations Parking Trailer towing Operating precautions Tyre pressure Safety chains Trailer brakes Trailer detection (where fitted) Installation of coupling device Vehicle security Power steering system Brake system Brake precautions Anti-lock Braking System (ABS) Electronic Stability Programme (ESP) system (where fitted) Electronic Stability Programme (ESP) OFF switch Cold weather driving Battery Engine coolant Tyre equipment Special winter equipment Corrosion protection

Popular Owner Manuals