2006-2014 Nissan Qashqai SUV Starting and driving -> Brake precautions User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Starting and driving -> Brake precautions for Your Nissan Qashqai SUV First Generation (2006-2014)

BRAKE SYSTEM  
The brake system has two separate hydraulic cir-  
cuits. If one circuit malfunctions, you will still have  
braking ability with two wheels.  
hill gradient. Overheated brakes may reduce brak-  
ing performance and could result in loss of vehicle  
control.  
ANTI-LOCK BRAKING SYSTEM (ABS)  
WARNING  
CAUTION  
BRAKE PRECAUTIONS  
Vacuum assisted brake  
The Anti-lock Braking System (ABS) is a so-  
•
phisticated device, but it cannot prevent acci-  
dents resulting from careless or dangerous  
driving techniques. It can help maintain ve-  
hicle control during braking on slippery sur-  
faces. Remember that stopping distances  
may also be longer on rough, gravel or snow  
covered roads, or if you are using snow  
chains. Always maintain a safe distance from  
the vehicle in front of you. Ultimately, the  
driver is responsible for safety.  
While driving on a slippery surface, be careful  
when braking, accelerating or downshifting.  
Abrupt braking actions or sudden acceleration  
could cause the wheels to skid and result in an  
accident.  
The brake booster aids braking by using engine  
vacuum. If the engine stops or the drive belt is bro-  
ken, you can stop the vehicle by depressing the  
brake pedal. However, greater foot pressure on the  
brake pedal will be required to stop the vehicle and  
the stopping distance will be longer.  
Be aware that brakes will fade if repeated heavy  
brake applications are made.  
Driving uphill  
Wet brakes  
When starting on a steep gradient, it is sometimes  
difficult to operate the brake (AT or CVT models) or  
both the brake and clutch (MT models). Use the  
handbrake to hold the vehicle. Do not slip the clutch  
(MT models). When ready to start, slowly release  
the handbrake while depressing the accelerator  
pedal and releasing the clutch (MT models) or de-  
pressing the accelerator pedal (AT or CVT models).  
When the vehicle is washed or driven through wa-  
ter, the brakes may get wet. As a result, your brak-  
ing distance will be longer and the vehicle may pull  
to one side during braking.  
Tyre type and condition may also affect brak-  
ing effectiveness.  
•
–
When replacing tyres, install the specified  
size of tyres on all four wheels.  
To dry brakes, drive the vehicle at a safe speed  
while lightly pressing the brake pedal to heat up the  
brakes. Do this until the brakes return to normal.  
Avoid driving the vehicle at high speeds until the  
brakes function correctly.  
–
When installing a spare tyre, make sure it  
is the proper size and type as specified on  
the  
tyre  
placard.  
See  
“Vehicle  
Driving downhill  
identification” in the “9. Technical  
information” section for the tyre placard  
location.  
The engine braking action is effective for controlling  
the vehicle while descending hills.  
Using the brakes  
Avoid resting your foot on the brake pedal while  
driving. This will overheat the brakes, wear out the  
brake linings and pads faster and reduce fuel  
economy performance.  
–
For detailed information, see “Wheels and  
tyres” in the “8. Maintenance and  
do-it-yourself” section.  
The gear lever (MT models) should be placed in a  
gear position low enough to obtain sufficient engine  
braking.  
The Anti-lock Braking System (ABS) controls the  
brakes so that the wheels do not lock during hard  
braking or when braking on slippery surfaces. The  
system detects the rotation speed at each wheel  
For the AT or CVT models, a low gear position in  
the manual shift mode, low enough to obtain suffi-  
cient engine braking, should be selected.  
To help reduce brake wear and to prevent the brakes  
from overheating, reduce speed and downshift to a  
lower gear before going down a slope or long down-  
Starting and driving 5-39  
Downloaded from manuals search engine  

Related Topics

Running-in schedule Before starting the engine Precautions when starting and driving Exhaust gas (Carbon Monoxide) On-pavement and off-road driving precautions Three-way catalyst (Petrol engine models) To help prevent damage Turbocharger system (Diesel engine models) Diesel Particulate Filter (DPF) (where fitted) Regeneration restrictions If regeneration fails Care when driving Engine cold start period Loading luggage Driving on wet roads Driving under winter conditions Ignition switch Automatic transmission or Continuously variable transmission Steering lock Key positions Ignition knob (where fitted) Manual transmission Ignition knob position Emergency key ? Intelligent Key dead battery situation NISSAN Anti-Theft System (NATS) Starting the engine Driving the vehicle Driving with manual transmission Driving with automatic transmission or with continuously variable transmission (Models with manual shift) Driving with Continuously Variable Transmission (CVT) (Models without manual shift) Stop/Start System (where fitted) Normal operation Precautions Stop/Start System OFF switch Environmental savings Ultrasonic Parking Sensor (where fitted) Four-wheel Drive (4WD) (where fitted) 4WD mode operations 4WD shift tips 4WD Warning light 4WD Mode indicator lights Driving four-wheel drive (4WD) safely Cruise control (where fitted) Precautions on cruise control Cruise control system operations Speed limiter Speed limiter operations Parking Trailer towing Operating precautions Tyre pressure Safety chains Trailer brakes Trailer detection (where fitted) Installation of coupling device Vehicle security Power steering system Brake system Anti-lock Braking System (ABS) Electronic Stability Programme (ESP) system (where fitted) Electronic Stability Programme (ESP) OFF switch Cold weather driving Battery Engine coolant Tyre equipment Special winter equipment Corrosion protection

Popular Owner Manuals