4. Take your foot off the accelerator pedal.
The vehicle will maintain the set speed.
2 km/h or 1 MPH for M9R diesel models
CRUISE CONTROL SYSTEM
OPERATIONS
Push and hold the RES (resume) j1 switch up-
wards or the SET switch j2 downwards. The
vehicle speed will increase or decrease to the
new set speed.
•
The cruise control system can be set at the follow-
ing speeds:
If the vehicle speed is less than the minimum set
speed (see table), it will not be possible to set
the cruise control system.
Minimum
speed
Engine type
Maximum speed
The new set speed value j9 will be displayed in the
combination meter.
Changing a cruising speed
1.6 petrol
HR16DE
MT: 170 km/h (100 MPH)
CVT: 155 km/h (95 MPH)
Use any one of the following methods to change the
cruising speed.
45 km/h
Passing another vehicle
(30 MPH)
2.0 petrol
MR20DE
MT: 185 km/h (110 MPH)
CVT: 175 km/h (105 MPH)
Depress the accelerator pedal to accelerate. After
releasing the accelerator pedal, the vehicle will re-
turn to the previously set speed.
Slow the vehicle as normal using the footbrake
pedal, the SET indicator j8 in the combination
•
1.5 diesel
K9K
30 km/h
(20 MPH)
166 km/h (70 MPH)
170 km/h (106 MPH)
190 km/h (119 MPH)
meter will be turned off.
2.0 diesel
M9R
30 km/h
(18 MPH)
The set speed value j9 will flash until the vehicle
returns to the previously set speed.
When the vehicle reaches the desired cruising
speed, push and release the SET switch j2
downwards.
1.6 diesel
R9M
40 km/h
(25 MPH)
Cancelling the cruise control system
The new set speed value j9 and SET indicator
j8 will be displayed in the combination meter.
To cancel a set speed limit, push the CANCEL
switch j3 . The SET indicator j8 in the combination
meter will be turned off.
Turning the cruise control system on
The cruise control system can be switched on after
engine start or when driving.
Press the accelerator pedal.
•
The set speed value j9 will remain displayed, as
this speed is now stored in the cruise control sys-
tem memory.
When the vehicle reaches the desired cruising
speed, push and release the SET switch j2
downwards.
Push the cruise control main switch j5 . The
CRUISE indicator and the cruise control symbol j7
will illuminate in the combination meter display.
The cruise control system will also be cancelled
automatically by any of the following:
The new set speed value j9 and SET indicator
j8 will be displayed in the combination meter.
Setting a cruising speed
Pressing the footbrake pedal.
•
•
•
1. Accelerate to the desired cruising speed.
Push and release the RES (resume) j1 switch
upwards or the SET switch j2 downwards to
increase or decrease the set speed in steps of:
•
Pressing the clutch pedal.
2. Push the SET switch j2 downwards and release
it.
Moving the gear lever (MT models) or selector
lever (AT or CVT models) to the N (Neutral) posi-
tion.
1 km/h or 1 MPH for petrol models or R9M die-
sel models
3. The SET indicator j8 and the set speed value
j9 will be displayed in the combination meter
display.
2 km/h or 2–3 MPH K9K diesel models
5-30 Starting and driving
Downloaded from manuals search engine