Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-Speed Manual Transmission 02Q - Edition 05.2013
Adjust the gearshift mechanism. Refer to
⇒ “1.11 Selector Mechanism, Adjusting”, page 97 .
1.3
Overview - Gearshift Knob and Cover
1 - Badge
❑ Can be carefully pried
off a plastic or leather
shift knob
2 - Gearshift Knob
❑ With boot
❑ The shift knob and boot
cannot be separated
from each other.
❑ Always replace together
❑ Removing and instal‐
ling. Refer to
⇒ “1.4 Boot with Shifter
Knob and Noise Insula‐
tion, Removing and In‐
stalling”, page 79 .
3 - Clamp
❑ For securing the shift
knob to the shift lever
❑ Secure on the gearshift
knob -item 2-
⇒ Item 2 (page 79) using
Hose Clamp Pliers -
VAG1275- .
❑ Replace after removing
4 - Center Console Frame
❑ Combined in one piece
with the upper center
console section on
some versions
5 - Noise Insulation
❑ Not on all vehicles
❑ Arrow on noise insula‐
tion points in direction of
travel
❑ Retaining tab spacing varies
❑ Therefore can only be arranged in one position
1.4
Boot with Shifter Knob and Noise Insu‐
lation, Removing and Installing
Special tools and workshop equipment required
♦ Hose Clip Pliers - VAG1275A-
1. Shift Mechanism, Servicing
79
English 
