Get OperationandHousing -> 1.5 Overview - Gearshift Lever and Gearshift Housing, through 10/2006 Guide for Volkswagen Golf 4 Door Fifth Generation (2003-2008)

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤

6-Speed Manual Transmission 02Q - Edition 05.2013

– Install the shifter knob with frame and boot and press the new

clamp -arrow- together.

– Press the boot with the frame into the center console or the

boot into the frame.

1.5

Overview - Gearshift Lever and Gearshift Housing, through 10/2006

Note

Lubricate bearing areas and slide surfaces with Grease - G 000 450 02- .

1 - Lock Washer

❑ Removing and instal‐

ling. Refer to

⇒ Fig. ““Removing and

Installing the Lock

Washer”“ , page 83 .

2 - Bushing

3 - Pressure Spring

4 - Bushing

5 - TORX Bolt

❑ 5 Nm

6 - Cover

7 - Insulation

8 - Insulation

9 - Bearing Shell

10 - Gearshift Lever Guide

11 - Washer

12 - Seal

❑ Between the gearshift

housing and the under‐

body

❑ Self-adhesive

❑ Affix to the gearshift

housing

13 - Gearshift Lever

14 - Gearshift Housing

15 - Bearing Bushing

16 - Mounting Pin

17 - Guide Bushing

18 - Pressure Spring

❑ Installing. Refer to ⇒ Fig. ““Installing the Pressure Spring”“ , page 83 .

1. Shift Mechanism, Servicing

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤

6-Speed Manual Transmission 02Q - Edition 05.2013

19 - Selector Bracket

20 - TORX Bolt

❑ 5 Nm

21 - Seal

❑ Replace after removing

22 - Base Plate

❑ Bend the tabs in order to remove

❑ Replace after removing

23 - Selector Cable

❑ To the selector bracket

❑ Removing and installing. Refer to

⇒ Fig. ““Detaching from the Selector Cable and the Shift Cable and Attaching”“ , page 82 .

24 - Gearshift Cable

❑ Removing from the shift lever guide and attaching to the shift lever guide. Refer to

⇒ Fig. ““Detaching from the Selector Cable and the Shift Cable and Attaching”“ , page 82

25 - Lock Washer

❑ Replace after removing

26 - Nut

❑ M6: 8 Nm

❑ M8: 25 Nm

❑ Quantity: 4

27 - Bearing Bushing

❑ Fits in one position only

28 - Lock Washer

❑ Replace after removing

Detaching from the Selector Cable and the Shift Cable and At‐

taching

– Remove the lock washer from the shift cable -A- and the se‐

lector cable -B-.

Lift the tab with a screwdriver in direction of -arrow 1- and remove

the lock washer in direction of -arrow 2-.

– Remove the shift cable -A- from the gearshift lever mount.

– Remove the selector cable -B- from the selector bracket

mount.

Rep. Gr.34 - Operation and Housing

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤

6-Speed Manual Transmission 02Q - Edition 05.2013

Removing and Installing the Lock Washer

– Push the bushing -arrow B- all the way in direction of

-arrow C- and remove or install the lock washer -arrow A-.

Note

♦ Do not tilt the bushing when pushing it down.

♦ The slot in the lever for the circlip must be visible.

♦ Carefully release the tension on the spring.

Installing the Pressure Spring

– Install the compression spring so that the brace -A- contacts

upper part of pin -arrow-.

– Pull the brace -B- downward so that it reached the bottom of

the pin -arrow-.

1.6

Overview - Gearshift Lever and Gearshift Housing, from 11/2006

Note

♦ Lubricate the bearing areas and the sliding surfaces.

♦ Refer to the Parts Catalog for the grease allocation.

♦ Gearshift mechanism, disassembling and assembling. Refer to

⇒ “1.12 Selector Mechanism, Disassembling and Assembling, from 11/2006”, page 100 .

1. Shift Mechanism, Servicing

OperationandHousing -> 1.5 Overview - Gearshift Lever and Gearshift Housing, through 10/2006 for Your Volkswagen Golf 4 Door Fifth Generation (2003-2008)

Related Topics

Popular Owner Manuals

Latest Owner Manuals