Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-Speed Manual Transmission 02Q - Edition 05.2013
Removing
– Remove the boot with the center console frame from the cen‐
ter console or pry it out carefully -arrows-.
Note
On some equipment versions, the boot must be pried out at the
front area.
– Fold the boot with the center console frame up over the shifter
knob.
– Open the clamp -arrow- and remove the shift knob and boot.
In some equipment versions, the center console frame remains
in the center console.
– It may be necessary to pull or pry the center console frame out
carefully.
– Remove the noise insulation -1-.
Installing
– Install the noise insulation.
Installation Location, Noise Insulation
•
•
-Arrow A- points in direction of travel.
The tabs -arrows B- must latch into the center console.
– Press the center console frame into the center console, if nec‐
essary.
– Then turn inner side of boot toward outside.
Install the shift knob all the way on.
80
Rep. Gr.34 - Operation and Housing
English 
