2003-2008 Volkswagen Golf 4 Door OperationandHousing -> 1.6 Overview - Gearshift Lever and Gearshift Housing, from 11/2006 User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

OperationandHousing -> 1.6 Overview - Gearshift Lever and Gearshift Housing, from 11/2006 for Your Volkswagen Golf 4 Door Fifth Generation (2003-2008)

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤  
6-Speed Manual Transmission 02Q - Edition 05.2013  
Removing and Installing the Lock Washer  
– Push the bushing -arrow B- all the way in direction of  
-arrow C- and remove or install the lock washer -arrow A-.  
Note  
Do not tilt the bushing when pushing it down.  
The slot in the lever for the circlip must be visible.  
Carefully release the tension on the spring.  
Installing the Pressure Spring  
– Install the compression spring so that the brace -A- contacts  
upper part of pin -arrow-.  
– Pull the brace -B- downward so that it reached the bottom of  
the pin -arrow-.  
1.6  
Overview - Gearshift Lever and Gearshift Housing, from 11/2006  
Note  
Lubricate the bearing areas and the sliding surfaces.  
Refer to the Parts Catalog for the grease allocation.  
Gearshift mechanism, disassembling and assembling. Refer to  
⇒ “1.12 Selector Mechanism, Disassembling and Assembling, from 11/2006”, page 100 .  
1. Shift Mechanism, Servicing  
83  
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤  
6-Speed Manual Transmission 02Q - Edition 05.2013  
1 - Base Plate  
❑ Bend the tabs in order to  
remove  
❑ Replace after removing  
2 - Seal  
❑ Replace after removing  
3 - Gearshift Lever  
❑ Can be removed and in‐  
stalled with the shift lev‐  
er guide installed  
-item 15-  
⇒ Item 15 (page 84) .  
4 - Washer  
❑ Slide out of shift lever as  
far as stop -arrow-.  
5 - Lock Washer  
❑ Be careful not to dam‐  
age the cables when re‐  
moving them  
❑ Replace after removing  
6 - Selector Cable  
❑ Pry off of selector brack‐  
et  
❑ Press onto selector  
bracket inside the shift  
mechanism  
❑ Installation position. Re‐  
fer to  
⇒ “1.1 Shift Mechanism  
Installation Position”,  
page 76 .  
7 - Bushing  
8 - Gearshift Cable  
❑ Pry off of shift lever guide  
❑ Press onto shift lever guide inside the shift mechanism  
❑ Installation position. Refer to ⇒ “1.1 Shift Mechanism Installation Position”, page 76 .  
9 - Insulation  
10 - Bearing Shell  
❑ Will get damaged when being removed  
❑ Replace after removing  
11 - Bushing  
12 - Lock Washer  
❑ Removing and installing. Refer to ⇒ Fig. ““Removing and Installing the Lock Washer”“ , page 83 .  
13 - Pressure Spring  
❑ Removing and installing. Refer to ⇒ Fig. ““Removing and Installing the Lock Washer”“ , page 83 .  
14 - Bushing  
15 - Gearshift Lever Guide  
16 - Nut  
❑ M6: 8 Nm  
❑ M8: 25 Nm  
❑ Quantity: 4  
84  
Rep. Gr.34 - Operation and Housing  
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤  
6-Speed Manual Transmission 02Q - Edition 05.2013  
17 - Seal  
❑ Between the gearshift housing and the underbody  
❑ Self-adhesive  
❑ Affix to the gearshift housing  
18 - Gearshift Housing  
❑ With spring and selector bracket  
❑ Spring and selector bracket cannot be removed  
1.7  
Overview - Operating Cables  
Note  
Lubricate the bearing areas and the sliding surfaces. Refer to the Parts Catalog for the grease allocation.  
1 - Gearshift Cable  
❑ Attach to the cable re‐  
tainer -item 18-  
⇒ Item 18 (page 87) .  
❑ Installation position. Re‐  
fer to  
⇒ “1.1 Shift Mechanism  
Installation Position”,  
page 76 .  
❑ From 11/2006 changed  
fastener on shift lever in‐  
side shift mechanism  
-item 8-  
⇒ Item 8 (page 84)  
2 - Selector Cable  
❑ Attach to the cable re‐  
tainer -item 11-  
⇒ Item 11 (page 86) .  
❑ Installation position. Re‐  
fer to  
⇒ “1.1 Shift Mechanism  
Installation Position”,  
page 76 .  
❑ From 11/2006 changed  
fastener on selector  
bracket inside shift  
mechanism -item 6-  
⇒ Item 6 (page 84)  
3 - Lock Washer  
❑ Replace after removing  
❑ Discontinued on gear‐  
shift mechanisms from  
11/2006. Refer to  
⇒ “1.6 Overview - Gear‐  
shift Lever and Gear‐  
shift Housing, from  
11/2006”, page 83  
4 - Lock Washer  
❑ Be careful not to damage the cables when removing them  
❑ Replace after removing  
1. Shift Mechanism, Servicing  
85  

Related Topics

1 Shift Mechanism, Servicing 1.1 Shift Mechanism Installation Position 1.2 Overview - Selector Mechanism 1.3 Overview - Gearshift Knob and Cover 1.4 Boot with Shifter Knob and Noise Insulation, Removing and Installing 1.5 Overview - Gearshift Lever and Gearshift Housing, through 10/2006 1.7 Overview - Operating Cables 1.8 Plastic Relay Lever 1.9 Selector Mechanism, Removing and Installing 1.10 Gearshift Cable and Selector Cable, Removing and Installing 1.11 Selector Mechanism, Adjusting 1.12 Selector Mechanism, Disassembling and Assembling, from 11/2006 2 Transmission, Removing and Installing, Jetta from MY 2005... Diesel FWD 2.1 Transmission, Removing and Installing 2.2 Tightening Specifications 3 Transmission, Removing and Installing, Jetta from MY 2005... Gasoline FWD 3.1 Transmission, Removing and Installing 3.2 Tightening Specifications 4 Transmission, Removing and Installing, Jetta from MY 11, Diesel and Gasoline 4.1 Transmission, Removing and Installing 4.2 Tightening Specifications 5 Transmission, Removing and Installing, Jetta from MY 2005... AWD 5.1 Transmission, TDI, Removing and Installing 6 Transmission, Transporting 6.1 FWD, Transporting Transmission 6.2 AWD, Transporting Transmission 7 Transmission, Securing in Engine/Transmission Holder 8 Transmission Fluid, Checking 9 Bevel Box, Removing and Installing 9.1 Bevel Box, Vehicles with TDI Engine without Particulate Filter... 9.2 Bevel Box... Vehicles with a Turbo Diesel Engine with a Particulate Filter... 9.3 Bevel Box... Vehicles with a Turbo Diesel Engine with a Particulate Filter... 10 Axle Oil in Bevel Box, Checking or Adding 10.1 Gear Oil in Bevel Box, Checking 10.2 Gear Oil in Bevel Box, Filling 11 Transmission, Disassembling and Assembling 11.1 Overview - Transmission, FWD 11.2 Overview - Transmission, AWD 11.3 Overview - FWD 11.4 Overview - AWD 11.5 Transmission Housing and Gearshift Mechanism, Removing and Installing 11.6 Overview - Input Shaft, Output Shafts... FWD Vehicles 11.7 Overview - Input Shaft, Output Shaft... AWD Vehicles 11.8 Assembly Sequence, Transmission ?without? a Securing Ring A... 11.9 Assembly Sequence: I = Transmission ?with? a Securing Ring A... 12 Transmission Housing, Servicing 13 Clutch Housing, Servicing 14 Shift Unit, Servicing 14.1 Selector Shaft Seal, Replacing 15 Shift Forks, Servicing 16 Special Tools 17 Special Tools

Popular Owner Manuals