Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-Speed Manual Transmission 02Q - Edition 05.2013
– Install the Adapter to the stop.
– Attach the elbow -A- to the Adapter .
– Make sure that the valve -arrow- is closed.
– Install the oil container -A- on the Charging Device For Haldex
Coupling 2 - VAS6291- .
Note
It is necessary to use the Wheel Alignment System - Wheel
Adapter Extensions - VAS6292/6- on some oil containers.
•
The hose must not sag.
– Open the valve -arrow- and hold the oil container as shown.
The bevel box is now filled.
– Lift the vehicle after a few minutes.
Note
♦ If the bevel gear is filled correctly, oil should leak out of the
Adapter .
♦ If no oil is escaping, lower the vehicle and perform filling pro‐
cedure again.
– Lift the vehicle.
– If oil leaks from the Adapter , set down the oil reservoir (for
example, on a tool trolley).
A portion of the excess oil runs back into the oil container.
– When the fluid stops running back, press the button in direction
of -arrow- and remove the Charging Device For Haldex Cou‐
pling 2 (shown on the Charging Device For Haldex Coupling
2 - Adapter 2 - VAS6291/2- ).
– Make sure there is still oil in the Charging Device For Haldex
Coupling 2 - VAS6291A- hose.
– Remove the Adapter .
220
Rep. Gr.34 - Operation and Housing
English 
