2010-2017 Audi A1 SUV Battery -> Battery Post/Terminal User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Battery -> Battery Post/Terminal for Your Audi A1 SUV 2010-2017

Audi A1 2011 ➤ , Audi A1 Sportback 2018 ➤ , Audi A2 2001 ➤ , Audi A3 20 ...  
Electrical Equipment General Information - Edition 08.2019  
1.3.2  
Battery Safety Label  
Safety Label on the Battery - A-  
1 - When working in the area of the Battery - A- , fire, sparks,  
open flame and smoking are prohibited. Avoid sparks when  
working with cables and electrical devices, and from elec‐  
trostatic discharge. Avoid short circuits. For this reason,  
tools should not be rested on the Battery - A- .  
2 - Wear protective eyewear when working on the Battery - A- .  
3 - Always keep acid and Batteries - A- out of the reach of chil‐  
dren.  
4 - Disposal: old batteries require special disposal. They may  
only be disposed of at a suitable collection facility and only  
in consideration of legal regulations.  
5 - Do not dispose of old batteries in household waste.  
6 - When handling Batteries - A- , there is a risk of explosion.  
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not  
Batterpyer-mAitte-dcuhnleasrsgaiunthgorpiserdobdyuAcUeDsI AaG.hAUigDhI AlyGedoxepslnoost givuaeragntaeesormacicxept any liability  
ture.  
with respect to the correctness of information in this document. Copyright by AUDI AG.  
7 - Always follow instructions on the Battery - A- , in the Parts  
Catalog and in the Owner's Manual.  
8 - Danger of burns: battery acid is severely corrosive, there‐  
fore protective gloves and eyewear must be worn when  
working on the Battery - A- . The Battery - A- must not be  
tipped because acid may spill from the ventilation openings.  
1.4  
Battery Post/Terminal  
Caution  
In order to prevent damage to the battery terminals and battery  
posts, observe the following:  
♦ Never use force to attach the battery terminals by hand.  
♦ Do not apply grease to battery posts.  
♦ The battery terminal clamps should be mounted so that  
the battery terminal sits flush with the clamp or protrudes  
out of it.  
♦ After tightening the battery terminal clamps to the speci‐  
fied torque, the threaded connections must not be tight‐  
ened again.  
Terminal clamp tightening specification. Refer to ⇒ Electrical  
Equipment; Rep. Gr. 27 ; Battery .  
1. Battery  
5

Related Topics

Popular Owner Manuals