Audi A1 2011 ➤ , Audi A1 Sportback 2018 ➤ , Audi A2 2001 ➤ , Audi A3 20 ...
Electrical Equipment General Information - Edition 08.2019
– Select the Select individual test button and select the
following tree structure consecutively:
♦ 12V vehicle electrical system
♦ C - Generator - Test
– Start the selected program and follow the instructions on the
Vehicle Diagnostic Tester display.
4.1.2
Starter Generator - C29- , Checking,
0K4 and VH0
Procedure
– Connect the Vehicle Diagnostic Tester .
– Select the Diagnostic mode and start the diagnosis.
– Select the Test plan tab.
– Select the Select individual test button and select the
following tree structure consecutively:
♦ 12V vehicle electrical system
♦ C29 - Starter Generator, Checking
– Start the selected program and follow the instructions on the
Vehicle Diagnostic Tester display.
4.1.3
Starter Generator - C29- , Checking,
0K4 and VH2/VH3
Procedure
– Connect the Vehicle Diagnostic Tester .
– Select the Diagnostic mode and start the diagnosis.
– Select the Test plan tab.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
– Select the Select individual test button and select the
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
following tree structure consecutively:
♦ Diagnostic-capable systems
♦ 00CC - Starter Generator -C29-
♦ 00CC - Partial System Conditions
♦ C29 - Starter Generator, Checking
– Start the selected program and follow the instructions on the
Vehicle Diagnostic Tester display.
4.2
Overview - Generator, Bosch through MY 2000
60
Rep. Gr.27 - Starter, Generator and Cruise Control