Audi A1 2011 ➤ , Audi A1 Sportback 2018 ➤ , Audi A2 2001 ➤ , Audi A3 20 ...
Electrical Equipment General Information - Edition 08.2019
– Remove the bolts -arrows-.
– Remove voltage regulator -1-.
Installing
– When installing the voltage regulator, make sure the carbon
brushes rest correctly on the slip rings.
Install in reverse order of removal, observing the following:
– Install the generator. Refer to ⇒ Electrical Equipment; Rep.
Gr. 27 ; Generator; Generator, Removing and Installing .
•
Tightening specification. Refer to
⇒ “4.3 Overview - Bosch Generator from 2001”, page 62 .
4.7
Carbon Brushes, Checking, All Bosch
Generators from 2001
Procedure
– Remove the voltage regulator: to 2007. Refer to
⇒ “4.4 Voltage Regulator, Bosch Generator from 2001, Re‐
moving and Installing”, page 63 , after 2007
⇒ “4.6 Voltage Regulator, Removing and Installing, Bosch
Generator from 2007”, page 64 .
– Check the length -a- of the carbon brushes.
•
Wear limit: -a- = 5 mm.
– Install the voltage regulator: to 2007. Refer to
⇒ “4.4 Voltage Regulator, Bosch Generator from 2001, Re‐
moving and Installing”, page 63 , after 2007
⇒ “4.6 Voltage Regulator, Removing and Installing, Bosch
Generator from 2007”, page 64 .
4.8
Overview - Generator, Valeo through MY 2000
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
4. Generator
65
English 
