2024-2025 Volkswagen Multivan SUV Passengerprotection -> Curtain airbags User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Passengerprotection -> Curtain airbags for Your Volkswagen Multivan SUV Seventh Generation (2024-2025)

Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
7
Curtain airbags  
7.1  
Assembly overview – curtain airbag  
The overview is shown for the left side of the vehicle as an  
example.  
1 - Retaining clip  
❑ Qty. 9  
❑ Renew after removing  
2 - Electrical connector  
❑ Qty. 2  
3 - Bolt  
❑ Qty. 2  
❑ 4 Nm  
4 - Curtain airbag  
❑ With driver side curtain  
airbag igniter - N251-  
and driver side curtain  
airbag rear igniter -  
N343-  
❑ With front passenger  
side curtain airbag ig‐  
niter - N252- and pas‐  
senger side curtain air‐  
bag rear igniter - N344-  
❑ ⇒ Rep. gr. 69 ; Re‐  
moving and installing  
curtain airbag with ignit‐  
er  
5 - Twist prevention line  
7.2  
Removing and installing curtain airbag  
with igniter  
Curtain airbag with driver side curtain airbag igniter - N251- ,  
driver side curtain airbag rear igniter - N343- , front passenger  
side curtain airbag igniter - N252- and Passenger side curtain  
airbag rear igniter - N344- will henceforth be referred to as  
“curtain airbag”.  
Removal and installation are described for left side of vehicle as  
an example.  
82  
Rep. gr.69 - Passenger protection  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Removing  
– Disconnect battery earth cable ⇒ Electrical system; Rep.  
gr. 27 ; Battery; Disconnecting and connecting battery .  
– Remove rear moulded headliner ⇒ Rep. gr. 70 ; Removing  
and installing moulded headliner .  
CAUTION  
Pyrotechnic components can trigger unintentionally.  
Risk of injury.  
– Discharge any static electricity in body by briefly touching  
door striker plate.  
NOTICE  
Risk of irreparable damage due to electrostatic discharge.  
– Do not touch connector contacts with your hands.  
– Touch the lifting platform or other earthed object to dis‐  
charge static electricity.  
– Release connector locks.  
– Disconnect electrical connectors.  
Note  
The curtain airbag is secured to the body by means of a bracket  
-1-, a retaining clip -2- and a clip -3-.  
– Use a commercially available pair of to remove clip -3- from  
retaining clip -2-.  
7. Curtain airbags  
83  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Position small, commercially available screwdriver -2- in re‐  
taining clip -1- on upper left.  
– Press locking device -3- in direction of -arrow A-. Using com‐  
mercially available plastic wedge, push retaining clip -1- in  
direction of -arrow B-, and hold it there.  
– Repeat procedure on 2nd locking device at bottom right.  
– Remove retaining clip -1- together with curtain airbag from  
body mounting.  
lk  
– Remove remaining retaining clips as described.  
– Unscrew bolt -2-.  
– Repeat procedure on rear curtain airbag.  
Important  
The aid of an additional person is required for the subse‐  
quent work steps.  
– Remove curtain airbag.  
Installing  
Install in reverse order of removal, observing the following:  
– Replace retaining clips by new ones ⇒ Electronic parts cata‐  
logue (ETKA) .  
Important  
84  
Rep. gr.69 - Passenger protection  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
The aid of an additional person is required for the subse‐  
quent work steps.  
CAUTION  
It is possible to trigger pyrotechnic components unintentional‐  
ly.  
Risk of injury  
– Discharge static electricity by briefly touching door striker  
plate.  
Important  
The twist prevention line must be visible throughout the en‐  
tire length of the curtain airbag.  
lk  
– Engage curtain airbag -1- in direction of -arrow A-.  
– Engage curtain airbag -1- in direction of -arrow B-, and tight‐  
en bolt.  
– Repeat procedure on rear curtain airbag.  
– Clip curtain airbag to body starting at igniter and working  
from there towards front and rear.  
– After installing, pull retaining clips at each mounting point to  
check that they are fitted correctly.  
CAUTION  
It is possible to trigger pyrotechnic components unintentional‐  
ly.  
Risk of injury  
– Discharge static electricity by briefly touching door striker  
plate.  
NOTICE  
Risk of irreparable damage due to electrostatic discharge.  
– Do not touch connector contacts with your hands.  
– Touch the lifting platform or other earthed object to dis‐  
charge static electricity.  
7. Curtain airbags  
85  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Connect electrical connector -1- in direction of -arrow A- until  
it engages audibly.  
– Engage connector lock -2- in direction of -arrow B-.  
– Ensure that wire is not trapped.  
– Connect battery earth cable ⇒ Electrical system; Rep.  
gr. 27 ; Battery; Disconnecting and connecting battery .  
lk  
CAUTION  
Pyrotechnic components can trigger unintentionally.  
Risk of injury.  
– Keep far away from pyrotechnic components when switch‐  
ing on ignition.  
– Switch on ignition.  
– Read and clear event memory using ⇒ Vehicle diagnostic  
tester.  
Tightening torques  
♦ ⇒ Rep. gr. 69 ; Assembly overview – curtain airbag  
86  
Rep. gr.69 - Passenger protection  

Related Topics

Safety information and repair notes Safety information Repair instructions Seat belts Assembly overview ? front three-point seat belt Assembly overview ? rear outer three-point seat belt Assembly overview ? rear centre three-point seat belt Assembly overview ? front belt buckle Assembly overview ? rear belt buckle Removing and installing front three-point seat belt [NX10]/[NX11] Removing and installing rear three-point seat belt Removing and installing front belt guide Removing and installing belt height adjuster Removing and installing front belt buckle Removing and installing rear belt buckle Airbag control unit Assembly overview ? airbag control unit Removing and installing airbag control unit [J234] Front airbag, driver side Assembly overview ? front airbag, driver side Removing and installing airbag unit with airbag igniter on driver side [N95] Renewing connector on airbag Front passenger airbag Assembly overview ? front passenger airbag Removing and installing front passenger airbag unit with igniter Removing and installing key-operated switch to deactivate airbag on front passenger side [E224] Side airbags Assembly overview ? front side airbag, outer side Assembly overview - front inner side airbag Removing and installing front side airbag, outer side Removing and installing front inner side airbag Assembly overview ? curtain airbag Removing and installing curtain airbag with igniter Airbag crash sensors Assembly overview - crash sensors for airbags Removing and installing crash sensor for front airbag [G190] Removing and installing front side airbag crash sensor [G179/G180] Removing and installing rear side airbag crash sensor [G256/G257] Removing and installing crash sensor for side airbag in B-pillar [G1101/G1102] Seat occupied recognition Removing and installing front seat occupied sensor [G1067]/[G128] Removing and installing battery in control unit for wireless connection of seat occupied sensors Removing and installing rear seat occupied sensor [G1116], [G1117], [G1118], [G1119], [G1120] Removing and installing control unit for wireless connection of seat occupied sensors

Popular Owner Manuals