Passengerprotection -> Removing and installing rear seat occupied sensor [G1116], [G1117], [G1118], [G1119], [G1120] for Your Volkswagen Multivan SUV Seventh Generation (2024-2025)

Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Pull control unit -2- off housing -1-.  
lk  
– Remove battery -1-.  
Installing  
Install in reverse order of removal.  
9.3  
Removing and installing rear seat  
occupied sensor [G1116], [G1117],  
[G1118], [G1119], [G1120]  
The rear left seat occupied sensor, seat row 2 - G1116- , rear  
right seat occupied sensor, seat row 2 - G1117- , rear centre  
seat occupied sensor, seat row 2 - G1118- , rear left seat occu‐  
pied sensor, seat row 3 - G1119- and rear right seat occupied  
sensor, seat row 3 - G1120- will henceforth be referred to as  
“seat occupied sensor”.  
Removal and installation are described for one seat occupied  
sensor as an example.  
9. Seat occupied recognition  
97  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Removing  
– Operate locking lever -2-, and fold up seat padding -1-.  
– Unclip cover -1- from retainer strip -2-.  
– Detach cover -3- from seat pan.  
lk  
– Disconnect electrical connector -1-.  
– Press locking device -arrow-, and remove seat occupied  
sensor -2- from seat pan. To do this, push seat padding  
upwards slightly.  
Installing  
Install in reverse order of removal.  
98  
Rep. gr.69 - Passenger protection  

Related Topics