Passengerprotection -> Removing and installing rear three-point seat belt for Your Volkswagen Multivan SUV Seventh Generation (2024-2025)

Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
All vehicles (continued)  
Tightening torques  
♦ ⇒ Rep. gr. 69 ; Assembly overview – front three-point seat  
belt  
2.7  
Removing and installing rear three-  
point seat belt  
2.7.1  
Removing and installing rear three-  
point seat belt, 2nd row  
Rear three-point seat belt with rear belt tensioner igniter on  
driver side - N196- and rear belt tensioner igniter on passenger  
side - N197- will henceforth be referred to as “three-point seat  
belt”.  
Removal and installation are described for left side of vehicle as  
an example.  
Removing  
– Disconnect battery earth cable ⇒ Electrical system; Rep.  
gr. 27 ; Battery; Disconnecting and connecting battery .  
lk  
– Remove side trim ⇒ Rep. gr. 70 ; Removing and installing  
side trim .  
– Unscrew bolt -1-.  
– Remove belt guide fitting -2-.  
CAUTION  
It is possible to trigger pyrotechnic components unintentional‐  
ly.  
Risk of injury  
– Discharge static electricity by briefly touching door striker  
plate.  
2. Seat belts  
55  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
NOTICE  
Risk of irreparable damage due to electrostatic discharge.  
– Do not touch connector contacts with your hands.  
– Touch the lifting platform or other earthed object to dis‐  
charge static electricity.  
lk  
– Disconnect electrical connector -1-, releasing securing clip  
with a small commercially available screwdriver when doing  
so.  
– Unscrew bolt -2-.  
– Remove rear three-point seat belt -3-.  
Installing  
Install in reverse order of removal, observing the following:  
– Connect battery earth cable ⇒ Electrical system; Rep.  
gr. 27 ; Battery; Disconnecting and connecting battery .  
CAUTION  
Pyrotechnic components can trigger unintentionally.  
Risk of injury.  
– Keep far away from pyrotechnic components when switch‐  
ing on ignition.  
– Switch on ignition.  
Tightening torques  
♦ ⇒ Rep. gr. 69 ; Assembly overview – rear outer three-point  
seat belt  
2.7.2  
Removing and installing rear three-  
point seat belt, 3rd seat row  
Rear three-point seat belt with igniter for driver side seat belt  
tensioner, seat row 3 - N668- and igniter for passenger side  
56  
Rep. gr.69 - Passenger protection  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
seat belt tensioner, seat row 3 - N669- will henceforth be refer‐  
red to as “three-point seat belt”.  
Removal and installation are described for left side of vehicle as  
an example.  
Removing  
– Disconnect battery earth cable ⇒ Electrical system; Rep.  
gr. 27 ; Battery; Disconnecting and connecting battery .  
– Remove side trim ⇒ Rep. gr. 70 ; Removing and installing  
side trim .  
– Unscrew nut -2-.  
lk  
– Remove belt guide fitting -1-.  
CAUTION  
It is possible to trigger pyrotechnic components unintentional‐  
ly.  
Risk of injury  
– Discharge static electricity by briefly touching door striker  
plate.  
NOTICE  
Risk of irreparable damage due to electrostatic discharge.  
– Do not touch connector contacts with your hands.  
– Touch the lifting platform or other earthed object to dis‐  
charge static electricity.  
2. Seat belts  
57  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Disconnect electrical connector, releasing securing clip with  
a small commercially available screwdriver when doing so.  
– Unscrew bolt -2-.  
– Remove rear three-point seat belt -1-.  
Installing  
Install in reverse order of removal, observing the following:  
– Connect battery earth cable ⇒ Electrical system; Rep.  
gr. 27 ; Battery; Disconnecting and connecting battery .  
CAUTION  
lk  
Pyrotechnic components can trigger unintentionally.  
Risk of injury.  
– Keep far away from pyrotechnic components when switch‐  
ing on ignition.  
– Switch on ignition.  
Tightening torques  
♦ ⇒ Rep. gr. 69 ; Assembly overview – rear outer three-point  
seat belt  
2.7.3  
Removing and installing rear three-  
point seat belt, centre  
Note  
Seat with integrated three-point seat belt  
Removing  
– Remove cover and padding of rear seat backrest ⇒ Rep.  
gr. 74 ; Removing and installing cover and padding of rear  
seat backrest .  
– Remove adapter for back panel trim ⇒ Rep. gr. 72 ; Re‐  
moving and installing back panel trim .  
58  
Rep. gr.69 - Passenger protection  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Unscrew bolt -1-.  
– Remove belt guide fitting -2-.  
lk  
– Unscrew bolt -2-.  
– Remove three-point automatic seat belt -1-.  
Installing  
Install in reverse order of removal, observing the following:  
– Guide three-point seat belt through backrest frame and  
adapter for back panel trim.  
– Guide three-point seat belt through backrest foam.  
Tightening torques  
♦ ⇒ Rep. gr. 69 ; Assembly overview – rear centre three-point  
seat belt  
2.8  
Removing and installing front belt  
guide  
Removal and installation are described for left side of vehicle as  
an example.  
2. Seat belts  
59  

Related Topics