Multivan 2025 ➤ , Multivan 2022 ➤
General body repairs, interior - Edition 09.2024
lk
9
Seat occupied recognition
9.1
Removing and installing front seat oc‐
cupied sensor [G1067]/[G128]
The seat occupied sensor on driver side - G1067- and seat
occupied sensor on front passenger side - G128- will henceforth
be referred to as “seat occupied sensor”.
Removing
– Move front seat to rearmost and highest position.
– Disconnect electrical connector -2-.
– Unclip mounting -1- -arrows-.
– Detach seat occupied sensor -3-. To do this, push padding
upwards slightly.
Installing
Install in reverse order of removal, observing the following:
– Connect electrical connector until it engages audibly.
9.2
Removing and installing battery in con‐
trol unit for wireless connection of seat
occupied sensors
The battery in the control unit for wireless connection of seat
occupied sensors will henceforth be referred to as “battery”.
The control unit for wireless connection of seat occupied sen‐
sors will henceforth be referred to as “control unit”.
Removing
– Remove control unit for wireless connection of seat occupied
sensors ⇒ Rep. gr. 69 ; Removing and installing control unit
for wireless connection of seat occupied sensors .
96
Rep. gr.69 - Passenger protection
English 