2024-2025 Volkswagen Multivan SUV Passengerprotection -> Removing and installing airbag unit with airbag igniter on driver side [N95] User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Passengerprotection -> Removing and installing airbag unit with airbag igniter on driver side [N95] for Your Volkswagen Multivan SUV Seventh Generation (2024-2025)

Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
4
Front airbag, driver side  
4.1  
Assembly overview – front airbag, driver side  
The overview shows a left-hand drive vehicle as an example.  
For right-hand drive vehicles, the layout is a mirror image.  
1 - Steering column electron‐  
ics control unit - J527-  
❑ With airbag coil con‐  
nector and return ring  
with slip ring - F138-  
❑ ⇒ Electrical system;  
Rep. gr. 94 ; Steer‐  
ing column switch mod‐  
ule; Removing and in‐  
stalling steering column  
electronics control unit  
[J527]  
2 - Steering wheel  
❑ ⇒ Running gear,  
axles, steering; Rep.  
gr. 48 ; Steering wheel;  
Removing and instal‐  
ling steering wheel  
3 - Bolt  
❑ Tightening torque  
⇒ Running gear, axles,  
steering; Rep. gr. 48 ;  
Steering wheel; Assem‐  
bly overview - steering  
wheel  
4 - Airbag unit  
❑ With driver side airbag  
igniter - N95- .  
❑ ⇒ Rep. gr. 69 ; Re‐  
moving and installing  
airbag unit with airbag  
igniter on driver side  
[N95]  
5 - Connector on airbag  
❑ ⇒ Rep. gr. 69 ; Re‐  
newing connector on  
airbag  
4.2  
Removing and installing airbag unit  
with airbag igniter on driver side [N95]  
Special tools and workshop equipment required  
♦ release tool - T10610-  
Airbag unit with airbag igniter on driver side - N95- is referred to  
hereafter as airbag unit.  
4. Front airbag, driver side  
67  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Removing  
– Deactivate vehicle’s drive system.  
– Turn steering wheel 90° from straight-ahead position.  
– Insert release tool - T10610- -1- as far as stop into opening  
for locking bracket -2-.  
– Pull release tool - T10610- -1- in direction of -arrow- and  
release locking bracket -2-.  
lk  
– Turn steering wheel 180°.  
– Repeat release procedure.  
– Apply light pressure onto airbag unit in order to relieve ten‐  
sion from locking bracket.  
– Bring steering wheel to straight-ahead position.  
– Disconnect battery earth cable ⇒ Electrical system; Rep.  
gr. 27 ; Battery; Disconnecting and connecting battery .  
CAUTION  
It is possible to trigger pyrotechnic components unintentional‐  
ly.  
Risk of injury  
– Discharge static electricity by briefly touching door striker  
plate.  
NOTICE  
Risk of irreparable damage due to electrostatic discharge.  
– Do not touch connector contacts with your hands.  
– Touch the lifting platform or other earthed object to dis‐  
charge static electricity.  
68  
Rep. gr.69 - Passenger protection  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
lk  
– Pull off airbag unit -3- far enough to gain access to electrical  
connector -1-.  
– Pull out connector lock -2- in direction of -arrow-, press it  
down, and disconnect electrical connector -1-.  
WARNING  
Risk of injury due to unintended deployment of the airbag unit.  
– Place the airbag unit with the airbag facing upwards.  
– Place airbag unit down.  
Installing  
Install in reverse order of removal, observing the following:  
CAUTION  
It is possible to trigger pyrotechnic components unintentional‐  
ly.  
Risk of injury  
– Discharge static electricity by briefly touching door striker  
plate.  
NOTICE  
Risk of irreparable damage due to electrostatic discharge.  
– Do not touch connector contacts with your hands.  
– Touch the lifting platform or other earthed object to dis‐  
charge static electricity.  
– Fit electrical connector, and push it in until it audibly engag‐  
es.  
– Secure electrical connector on backside of airbag unit.  
– Make sure that no wires are trapped.  
4. Front airbag, driver side  
69  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Position airbag unit in steering wheel, and press it on until it  
engages audibly.  
lk  
– Connect battery earth cable ⇒ Electrical system; Rep.  
gr. 27 ; Battery; Disconnecting and connecting battery .  
CAUTION  
Pyrotechnic components can trigger unintentionally.  
Risk of injury.  
– Keep far away from pyrotechnic components when switch‐  
ing on ignition.  
– Reactivate vehicle’s drive system.  
– Read and clear event memory using ⇒ Vehicle diagnostic  
tester.  
4.3  
Renewing connector on airbag  
The airbag unit with airbag igniter on driver side - N95- will  
henceforth be referred to as “airbag unit with igniter”.  
Removing  
– Remove airbag unit with igniter ⇒ Rep. gr. 69 ; Removing  
and installing airbag unit with airbag igniter on driver side  
[N95] .  
CAUTION  
It is possible to trigger pyrotechnic components unintentional‐  
ly.  
Risk of injury  
– Discharge static electricity by briefly touching door striker  
plate.  
– Unhook wiring harness -1- from airbag unit with igniter -2-.  
– Remove wiring harness -1- with electrical connectors -3-.  
Installing  
Install in reverse order of removal, observing the following:  
70  
Rep. gr.69 - Passenger protection  

Related Topics

Passengerprotection
Safety information and repair notes Safety information Repair instructions Seat belts Assembly overview ? front three-point seat belt Assembly overview ? rear outer three-point seat belt Assembly overview ? rear centre three-point seat belt Assembly overview ? front belt buckle Assembly overview ? rear belt buckle Removing and installing front three-point seat belt [NX10]/[NX11] Removing and installing rear three-point seat belt Removing and installing front belt guide Removing and installing belt height adjuster Removing and installing front belt buckle Removing and installing rear belt buckle Airbag control unit Assembly overview ? airbag control unit Removing and installing airbag control unit [J234] Front airbag, driver side Assembly overview ? front airbag, driver side Renewing connector on airbag Front passenger airbag Assembly overview ? front passenger airbag Removing and installing front passenger airbag unit with igniter Removing and installing key-operated switch to deactivate airbag on front passenger side [E224] Side airbags Assembly overview ? front side airbag, outer side Assembly overview - front inner side airbag Removing and installing front side airbag, outer side Removing and installing front inner side airbag Curtain airbags Assembly overview ? curtain airbag Removing and installing curtain airbag with igniter Airbag crash sensors Assembly overview - crash sensors for airbags Removing and installing crash sensor for front airbag [G190] Removing and installing front side airbag crash sensor [G179/G180] Removing and installing rear side airbag crash sensor [G256/G257] Removing and installing crash sensor for side airbag in B-pillar [G1101/G1102] Seat occupied recognition Removing and installing front seat occupied sensor [G1067]/[G128] Removing and installing battery in control unit for wireless connection of seat occupied sensors Removing and installing rear seat occupied sensor [G1116], [G1117], [G1118], [G1119], [G1120] Removing and installing control unit for wireless connection of seat occupied sensors

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot