Multivan 2025 ➤ , Multivan 2022 ➤
General body repairs, interior - Edition 09.2024
8.2
Removing and installing crash sensor
for front airbag [G190]
Crash sensor for front airbag - G190- is referred to hereafter as
crash sensor.
Removal and installation are described for left side of vehicle as
an example.
Removing
WARNING
Danger of airbag triggering.
Risk of injury.
– Check whether the airbag warning lamp lights or flashes.
– If the airbag warning lamp lights or flashes, read out the
lk
event memory.
– If there is an entry in the event memory, follow the instruc‐
tions in Guided Fault Finding.
– Disconnect battery earth cable ⇒ Electrical system; Rep.
gr. 27 ; Battery; Disconnecting and connecting battery .
– Remove cover for air duct on lock carrier ⇒ Rep. gr. 23 ; Air
filter; Removing and installing air duct on lock carrier .
CAUTION
It is possible to trigger pyrotechnic components unintentional‐
ly.
Risk of injury
– Discharge static electricity by briefly touching door striker
plate.
NOTICE
Risk of irreparable damage due to electrostatic discharge.
– Do not touch connector contacts with your hands.
– Touch the lifting platform or other earthed object to dis‐
charge static electricity.
8. Airbag crash sensors
89
![2024-2025 Volkswagen Multivan SUV Passengerprotection -> Removing and installing crash sensor for front airbag [G190] User Manual](https://www.mycarusermanual.com/assets/images/logo-new.png "2024-2025 Volkswagen Multivan SUV Passengerprotection -> Removing and installing crash sensor for front airbag [G190] User Manual"){kind=logo}
English 
