Passengerprotection -> Front airbag, driver side for Your Volkswagen Multivan SUV Seventh Generation (2024-2025)

Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
4
Front airbag, driver side  
4.1  
Assembly overview – front airbag, driver side  
The overview shows a left-hand drive vehicle as an example.  
For right-hand drive vehicles, the layout is a mirror image.  
1 - Steering column electron‐  
ics control unit - J527-  
❑ With airbag coil con‐  
nector and return ring  
with slip ring - F138-  
❑ ⇒ Electrical system;  
Rep. gr. 94 ; Steer‐  
ing column switch mod‐  
ule; Removing and in‐  
stalling steering column  
electronics control unit  
[J527]  
2 - Steering wheel  
❑ ⇒ Running gear,  
axles, steering; Rep.  
gr. 48 ; Steering wheel;  
Removing and instal‐  
ling steering wheel  
3 - Bolt  
❑ Tightening torque  
⇒ Running gear, axles,  
steering; Rep. gr. 48 ;  
Steering wheel; Assem‐  
bly overview - steering  
wheel  
4 - Airbag unit  
❑ With driver side airbag  
igniter - N95- .  
❑ ⇒ Rep. gr. 69 ; Re‐  
moving and installing  
airbag unit with airbag  
igniter on driver side  
[N95]  
5 - Connector on airbag  
❑ ⇒ Rep. gr. 69 ; Re‐  
newing connector on  
airbag  
4.2  
Removing and installing airbag unit  
with airbag igniter on driver side [N95]  
Special tools and workshop equipment required  
♦ release tool - T10610-  
Airbag unit with airbag igniter on driver side - N95- is referred to  
hereafter as airbag unit.  
4. Front airbag, driver side  
67  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Removing  
– Deactivate vehicle’s drive system.  
– Turn steering wheel 90° from straight-ahead position.  
– Insert release tool - T10610- -1- as far as stop into opening  
for locking bracket -2-.  
– Pull release tool - T10610- -1- in direction of -arrow- and  
release locking bracket -2-.  
lk  
– Turn steering wheel 180°.  
– Repeat release procedure.  
– Apply light pressure onto airbag unit in order to relieve ten‐  
sion from locking bracket.  
– Bring steering wheel to straight-ahead position.  
– Disconnect battery earth cable ⇒ Electrical system; Rep.  
gr. 27 ; Battery; Disconnecting and connecting battery .  
CAUTION  
It is possible to trigger pyrotechnic components unintentional‐  
ly.  
Risk of injury  
– Discharge static electricity by briefly touching door striker  
plate.  
NOTICE  
Risk of irreparable damage due to electrostatic discharge.  
– Do not touch connector contacts with your hands.  
– Touch the lifting platform or other earthed object to dis‐  
charge static electricity.  
68  
Rep. gr.69 - Passenger protection  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
lk  
– Pull off airbag unit -3- far enough to gain access to electrical  
connector -1-.  
– Pull out connector lock -2- in direction of -arrow-, press it  
down, and disconnect electrical connector -1-.  
WARNING  
Risk of injury due to unintended deployment of the airbag unit.  
– Place the airbag unit with the airbag facing upwards.  
– Place airbag unit down.  
Installing  
Install in reverse order of removal, observing the following:  
CAUTION  
It is possible to trigger pyrotechnic components unintentional‐  
ly.  
Risk of injury  
– Discharge static electricity by briefly touching door striker  
plate.  
NOTICE  
Risk of irreparable damage due to electrostatic discharge.  
– Do not touch connector contacts with your hands.  
– Touch the lifting platform or other earthed object to dis‐  
charge static electricity.  
– Fit electrical connector, and push it in until it audibly engag‐  
es.  
– Secure electrical connector on backside of airbag unit.  
– Make sure that no wires are trapped.  
4. Front airbag, driver side  
69  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Position airbag unit in steering wheel, and press it on until it  
engages audibly.  
lk  
– Connect battery earth cable ⇒ Electrical system; Rep.  
gr. 27 ; Battery; Disconnecting and connecting battery .  
CAUTION  
Pyrotechnic components can trigger unintentionally.  
Risk of injury.  
– Keep far away from pyrotechnic components when switch‐  
ing on ignition.  
– Reactivate vehicle’s drive system.  
– Read and clear event memory using ⇒ Vehicle diagnostic  
tester.  
4.3  
Renewing connector on airbag  
The airbag unit with airbag igniter on driver side - N95- will  
henceforth be referred to as “airbag unit with igniter”.  
Removing  
– Remove airbag unit with igniter ⇒ Rep. gr. 69 ; Removing  
and installing airbag unit with airbag igniter on driver side  
[N95] .  
CAUTION  
It is possible to trigger pyrotechnic components unintentional‐  
ly.  
Risk of injury  
– Discharge static electricity by briefly touching door striker  
plate.  
– Unhook wiring harness -1- from airbag unit with igniter -2-.  
– Remove wiring harness -1- with electrical connectors -3-.  
Installing  
Install in reverse order of removal, observing the following:  
70  
Rep. gr.69 - Passenger protection  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
CAUTION  
It is possible to trigger pyrotechnic components unintentional‐  
ly.  
Risk of injury  
– Discharge static electricity by briefly touching door striker  
plate.  
– Push on wiring harness until it can be heard to engage.  
lk  
4. Front airbag, driver side  
71  

Related Topics