Get Passengerprotection -> Removing and installing crash sensor for side airbag in B-pillar [G1101/G1102] Guide for Volkswagen Multivan SUV Seventh Generation (2024-2025)

Multivan 2025 ➤ , Multivan 2022 ➤

General body repairs, interior - Edition 09.2024

– Disconnect electrical connector -2-.

– Unscrew bolt -arrow-.

– Detach crash sensor -1-.

Installing

Install in reverse order of removal, observing the following:

– Connect electrical connector until it engages audibly.

– Make sure that electrical wire is not trapped.

– Connect battery earth cable ⇒ Electrical system; Rep.

gr. 27 ; Battery; Disconnecting and connecting battery .

CAUTION

Pyrotechnic components can trigger unintentionally.

Risk of injury.

– Keep far away from pyrotechnic components when switch‐

ing on ignition.

– Switch on ignition.

– Read and clear event memory with ⇒ Vehicle diagnostic

tester.

Tightening torques

♦ ⇒ Rep. gr. 69 ; Assembly overview – airbag crash sensors

8.5

Removing and installing crash sen‐

sor for side airbag in B-pillar [G1101/

G1102]

Crash sensor for side airbag in B-pillar, driver side - G1101- and

crash sensor for side airbag in B-pillar, passenger side - G1102-

will henceforth be referred to as “crash sensor”.

Removal and installation are described for left side of vehicle as

an example.

8. Airbag crash sensors

Multivan 2025 ➤ , Multivan 2022 ➤

General body repairs, interior - Edition 09.2024

Removing

WARNING

Danger of airbag triggering.

Risk of injury.

– Check whether the airbag warning lamp lights or flashes.

– If the airbag warning lamp lights or flashes, read out the

event memory.

– If there is an entry in the event memory, follow the instruc‐

tions in Guided Fault Finding.

– Disconnect battery earth cable ⇒ Electrical system; Rep.

gr. 27 ; Battery; Disconnecting and connecting battery .

– Remove belt tensioner cover ⇒ Rep. gr. 70 ; Removing and

installing lower B-pillar trim .

CAUTION

It is possible to trigger pyrotechnic components unintentional‐

ly.

Risk of injury

– Discharge static electricity by briefly touching door striker

plate.

NOTICE

Risk of irreparable damage due to electrostatic discharge.

– Do not touch connector contacts with your hands.

– Touch the lifting platform or other earthed object to dis‐

charge static electricity.

– Disconnect electrical connector -2-.

– Unscrew bolts -3-.

– Remove belt end fitting tensioner -1-.

CAUTION

It is possible to trigger pyrotechnic components unintentional‐

ly.

Risk of injury

– Discharge static electricity by briefly touching door striker

plate.

Rep. gr.69 - Passenger protection

Multivan 2025 ➤ , Multivan 2022 ➤

General body repairs, interior - Edition 09.2024

NOTICE

Risk of irreparable damage due to electrostatic discharge.

– Do not touch connector contacts with your hands.

– Touch the lifting platform or other earthed object to dis‐

charge static electricity.

– Disconnect electrical connector -2-.

– Unscrew bolt -arrow-.

– Detach crash sensor -1-.

Installing

Install in reverse order of removal, observing the following:

– Connect electrical connector until it engages audibly.

– Ensure that wire is not trapped.

– Connect battery earth cable ⇒ Electrical system; Rep.

gr. 27 ; Battery; Disconnecting and connecting battery .

CAUTION

Pyrotechnic components can trigger unintentionally.

Risk of injury.

– Keep far away from pyrotechnic components when switch‐

ing on ignition.

– Switch on ignition.

– Read and clear event memory using ⇒ Vehicle diagnostic

tester.

Tightening torques

♦ ⇒ Rep. gr. 69 ; Assembly overview - crash sensors for

airbags

♦ ⇒ Rep. gr. 69 ; Assembly overview – front three-point seat

belt

8. Airbag crash sensors

Passengerprotection -> Removing and installing crash sensor for side airbag in B-pillar [G1101/G1102] for Your Volkswagen Multivan SUV Seventh Generation (2024-2025)

Related Topics

Passengerprotection

Popular Owner Manuals

Latest Owner Manuals