Multivan 2025 ➤ , Multivan 2022 ➤
General body repairs, interior - Edition 09.2024
9.4.2
Removing and installing control unit
for wireless connection of seat occu‐
pied sensors [J1248], [J1249], [J1250],
lk
[J1251], [J1252], [J1253]
The control unit for wireless connection of left seat occupied
sensor, seat row 2 - J1248- , control unit for wireless connection
of right seat occupied sensor, seat row 2 - J1249- , control unit
for wireless connection of centre seat occupied sensor, seat
row 2 - J1250- , control unit for wireless connection of left seat
occupied sensor, seat row 3 - J1251- , control unit for wireless
connection of right seat occupied sensor, seat row 3 - J1252-
and control unit for wireless connection of centre seat occupied
sensor, seat row 3 - J1253- will henceforth be referred to a
“control unit”.
Removal and installation are described for one control unit as
an example.
Removing
– Remove rear trim ⇒ Rep. gr. 72 ; Removing and installing
seat trim .
– Press locking device -arrow-. At the same time, pull control
unit -2- off rear trim -1-.
Installing
Install in reverse order of removal, observing the following:
If control unit has been renewed:
– Adapt control unit using ⇒ Vehicle diagnostic tester.
100
Rep. gr.69 - Passenger protection
English 