Passengerprotection -> Seat belts for Your Volkswagen Multivan SUV Seventh Generation (2024-2025)

Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
2
Seat belts  
2.1  
Assembly overview – front three-point seat belt  
The overview is shown for the left side of the vehicle as an  
example.  
lk  
2. Seat belts  
45  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
1 - Bolt  
❑ 20 Nm  
2 - Belt height adjustment  
❑ ⇒ Rep. gr. 69 ; Re‐  
moving and installing  
belt height adjuster  
3 - Front three-point seat belt  
❑ Electrically reversible,  
depending on equip‐  
ment/installation period  
❑ Left-hand drive vehi‐  
cles: front left seat belt  
- NX10- with driver seat  
belt tensioner igniter 1 -  
N153- and control unit  
for front left belt ten‐  
sioner - J854-  
❑ Right-hand drive vehi‐  
cles: front left seat belt  
- NX10- with front pas‐  
senger seat belt ten‐  
sioner igniter 1 - N154-  
and control unit for  
front left belt tensioner  
- J854-  
❑ ⇒ Rep. gr. 69 ; Re‐  
moving and installing  
front three-point seat  
belt  
4 - Bolt  
❑ 8 Nm  
5 - Belt end fitting tensioner  
❑ With igniter for driver-  
side seat belt tension‐  
er 2 - N297- or igniter  
for front passenger side seat belt tensioner 2 - N298-  
6 - Bolt  
❑ 40 Nm  
7 - Bolt  
❑ 40 Nm  
8 - Spreader rivet  
❑ Depending on equipment/installation period  
9 - Bolt  
❑ Qty. 2  
❑ 4.5 Nm  
10 - Front belt guide  
❑ ⇒ Rep. gr. 69 ; Removing and installing front belt guide  
11 - Bolt  
❑ 40 Nm  
46  
Rep. gr.69 - Passenger protection  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
2.2  
Assembly overview – rear outer three-  
point seat belt  
2.2.1  
Assembly overview – rear outer three-point seat belt, 2nd seat row  
The overview is shown for the left side of the vehicle as an  
example.  
1 - Bolt  
❑ 40 Nm  
2 - Outer rear three-point seat  
belt  
❑ With rear belt tensioner  
igniter on driver side -  
N196- or rear belt ten‐  
sioner igniter on pas‐  
senger side - N197-  
❑ ⇒ Rep. gr. 69 ; Re‐  
moving and installing  
rear outer three-point  
seat belt  
3 - Bolt  
❑ 40 Nm  
4 - Bolt  
❑ 40 Nm  
2.2.2  
Assembly overview – rear outer three-point seat belt, 3rd seat row  
Overview shown for left side of vehicle as an example  
2. Seat belts  
47  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
1 - Nut  
❑ 40 Nm  
2 - Outer rear three-point seat  
belt  
❑ Depending on equip‐  
ment/installation period  
❑ With igniter for driver  
side seat belt tension‐  
er, seat row 3 - N668-  
or igniter for passenger  
side seat belt tensioner,  
seat row 3 - N669-  
❑ ⇒ Rep. gr. 69 ; Re‐  
moving and installing  
rear outer three-point  
seat belt  
3 - Bolt  
❑ 40 Nm  
4 - Bolt  
❑ 40 Nm  
2.3  
Assembly overview – rear centre three-point seat belt  
Seat with integrated three-point seat belt  
48  
Rep. gr.69 - Passenger protection  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
1 - Belt guide cover  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
seat trim  
2 - Bolt  
❑ 40 Nm  
3 - Belt guide  
4 - Pop rivet  
❑ Qty. 2  
5 - Rear centre three-point  
seat belt  
❑ ⇒ Rep. gr. 69 ; Re‐  
moving and installing  
rear centre three-point  
seat belt  
6 - Pop rivet  
❑ Qty. 2  
7 - Belt guide  
8 - Bolt  
❑ 40 Nm  
9 - Bolt  
❑ 40 Nm  
2.4  
Assembly overview – front belt buckle  
Overview is shown for left side of vehicle as an example.  
2. Seat belts  
49  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
1 - Front seat  
❑ ⇒ Rep. gr. 72 ; As‐  
sembly overview – front  
seat  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
front seat  
2 - Front belt buckle  
❑ With driver side belt  
switch - E24- or front  
passenger side belt  
switch - E25-  
❑ ⇒ Rep. gr. 69 ; Re‐  
moving and installing  
front belt buckle  
3 - Electrical connector  
4 - Bracket  
5 - Bolt  
❑ Renew after removing  
❑ 40 Nm  
2.5  
Assembly overview – rear belt buckle  
2.5.1  
Assembly overview - rear belt buckle, outer  
50  
Rep. gr.69 - Passenger protection  
lk  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
1 - Rear outer belt buckle  
❑ With belt switch for seat  
row 2, right - F487- or  
belt switch for seat row  
2, left - F488-  
❑ With belt switch for seat  
row 3, rear left - E750-  
or belt switch for seat  
row 3, rear right - E751-  
❑ ⇒ Rep. gr. 69 ; Re‐  
moving and installing  
rear belt buckle  
2 - Bolt  
❑ 40 Nm  
2.5.2  
Assembly overview – rear belt buckle, centre  
2. Seat belts  
51  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
1 - Rear centre belt buckle  
❑ With belt switch for seat  
row 3, middle - F394-  
❑ ⇒ Rep. gr. 69 ; Re‐  
moving and installing  
rear belt buckle  
2 - Bolt  
❑ 40 Nm  
2.6  
Removing and installing front three-  
point seat belt [NX10]/[NX11]  
Front left seat belt - NX10- and front right seat belt - NX11- are  
referred to hereafter as three-point seat belt.  
Removal and installation are described for left side of vehicle as  
an example.  
Removing  
– Disconnect battery earth cable ⇒ Electrical system; Rep.  
gr. 27 ; Battery; Disconnecting and connecting battery .  
– Remove front belt guide ⇒ Rep. gr. 69 ; Removing and  
installing front belt guide .  
– Remove lower B-pillar trim ⇒ Rep. gr. 70 ; Removing and  
installing lower B-pillar trim .  
52  
Rep. gr.69 - Passenger protection  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Unscrew bolt -2-.  
– Remove belt guide fitting -1- with belt webbing.  
CAUTION  
It is possible to trigger pyrotechnic components unintentional‐  
ly.  
Risk of injury  
lk  
– Discharge static electricity by briefly touching door striker  
plate.  
NOTICE  
Risk of irreparable damage due to electrostatic discharge.  
– Do not touch connector contacts with your hands.  
– Touch the lifting platform or other earthed object to dis‐  
charge static electricity.  
– Disconnect electrical connector -5-, releasing securing clip  
with a small commercially available screwdriver when doing  
so.  
– Disconnect electrical connectors -3-.  
Note  
Diagram shows a vehicle with reversible belt tensioner.  
– Unclip spreader rivets -2-.  
– Unscrew bolt -4-.  
– Remove front three-point seat belt -1-.  
Installing  
Install in reverse order of removal, observing the following:  
2. Seat belts  
53  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
CAUTION  
It is possible to trigger pyrotechnic components unintentional‐  
ly.  
Risk of injury  
– Discharge static electricity by briefly touching door striker  
plate.  
NOTICE  
Risk of irreparable damage due to electrostatic discharge.  
– Do not touch connector contacts with your hands.  
– Touch the lifting platform or other earthed object to dis‐  
charge static electricity.  
– Insert front three-point seat belt with anti-twist protection -1-  
into mounting in direction of -arrow-, and tighten bolt.  
– Connect battery earth cable ⇒ Electrical system; Rep.  
gr. 27 ; Battery; Disconnecting and connecting battery .  
CAUTION  
Pyrotechnic components can trigger unintentionally.  
Risk of injury.  
– Keep far away from pyrotechnic components when switch‐  
ing on ignition.  
– Switch on ignition.  
Vehicles with control unit for front left belt tensioner - J854- or  
control unit for front right belt tensioner - J855-  
When front three-point automatic seat belt has been renewed:  
– Carry out function “Adapt control unit” using ⇒ Vehicle diag‐  
nostic tester ⇒ Rep. gr. 00 ; Access to diagnoses .  
54  
Rep. gr.69 - Passenger protection  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
All vehicles (continued)  
Tightening torques  
♦ ⇒ Rep. gr. 69 ; Assembly overview – front three-point seat  
belt  
2.7  
Removing and installing rear three-  
point seat belt  
2.7.1  
Removing and installing rear three-  
point seat belt, 2nd row  
Rear three-point seat belt with rear belt tensioner igniter on  
driver side - N196- and rear belt tensioner igniter on passenger  
side - N197- will henceforth be referred to as “three-point seat  
belt”.  
Removal and installation are described for left side of vehicle as  
an example.  
Removing  
– Disconnect battery earth cable ⇒ Electrical system; Rep.  
gr. 27 ; Battery; Disconnecting and connecting battery .  
lk  
– Remove side trim ⇒ Rep. gr. 70 ; Removing and installing  
side trim .  
– Unscrew bolt -1-.  
– Remove belt guide fitting -2-.  
CAUTION  
It is possible to trigger pyrotechnic components unintentional‐  
ly.  
Risk of injury  
– Discharge static electricity by briefly touching door striker  
plate.  
2. Seat belts  
55  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
NOTICE  
Risk of irreparable damage due to electrostatic discharge.  
– Do not touch connector contacts with your hands.  
– Touch the lifting platform or other earthed object to dis‐  
charge static electricity.  
lk  
– Disconnect electrical connector -1-, releasing securing clip  
with a small commercially available screwdriver when doing  
so.  
– Unscrew bolt -2-.  
– Remove rear three-point seat belt -3-.  
Installing  
Install in reverse order of removal, observing the following:  
– Connect battery earth cable ⇒ Electrical system; Rep.  
gr. 27 ; Battery; Disconnecting and connecting battery .  
CAUTION  
Pyrotechnic components can trigger unintentionally.  
Risk of injury.  
– Keep far away from pyrotechnic components when switch‐  
ing on ignition.  
– Switch on ignition.  
Tightening torques  
♦ ⇒ Rep. gr. 69 ; Assembly overview – rear outer three-point  
seat belt  
2.7.2  
Removing and installing rear three-  
point seat belt, 3rd seat row  
Rear three-point seat belt with igniter for driver side seat belt  
tensioner, seat row 3 - N668- and igniter for passenger side  
56  
Rep. gr.69 - Passenger protection  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
seat belt tensioner, seat row 3 - N669- will henceforth be refer‐  
red to as “three-point seat belt”.  
Removal and installation are described for left side of vehicle as  
an example.  
Removing  
– Disconnect battery earth cable ⇒ Electrical system; Rep.  
gr. 27 ; Battery; Disconnecting and connecting battery .  
– Remove side trim ⇒ Rep. gr. 70 ; Removing and installing  
side trim .  
– Unscrew nut -2-.  
lk  
– Remove belt guide fitting -1-.  
CAUTION  
It is possible to trigger pyrotechnic components unintentional‐  
ly.  
Risk of injury  
– Discharge static electricity by briefly touching door striker  
plate.  
NOTICE  
Risk of irreparable damage due to electrostatic discharge.  
– Do not touch connector contacts with your hands.  
– Touch the lifting platform or other earthed object to dis‐  
charge static electricity.  
2. Seat belts  
57  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Disconnect electrical connector, releasing securing clip with  
a small commercially available screwdriver when doing so.  
– Unscrew bolt -2-.  
– Remove rear three-point seat belt -1-.  
Installing  
Install in reverse order of removal, observing the following:  
– Connect battery earth cable ⇒ Electrical system; Rep.  
gr. 27 ; Battery; Disconnecting and connecting battery .  
CAUTION  
lk  
Pyrotechnic components can trigger unintentionally.  
Risk of injury.  
– Keep far away from pyrotechnic components when switch‐  
ing on ignition.  
– Switch on ignition.  
Tightening torques  
♦ ⇒ Rep. gr. 69 ; Assembly overview – rear outer three-point  
seat belt  
2.7.3  
Removing and installing rear three-  
point seat belt, centre  
Note  
Seat with integrated three-point seat belt  
Removing  
– Remove cover and padding of rear seat backrest ⇒ Rep.  
gr. 74 ; Removing and installing cover and padding of rear  
seat backrest .  
– Remove adapter for back panel trim ⇒ Rep. gr. 72 ; Re‐  
moving and installing back panel trim .  
58  
Rep. gr.69 - Passenger protection  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Unscrew bolt -1-.  
– Remove belt guide fitting -2-.  
lk  
– Unscrew bolt -2-.  
– Remove three-point automatic seat belt -1-.  
Installing  
Install in reverse order of removal, observing the following:  
– Guide three-point seat belt through backrest frame and  
adapter for back panel trim.  
– Guide three-point seat belt through backrest foam.  
Tightening torques  
♦ ⇒ Rep. gr. 69 ; Assembly overview – rear centre three-point  
seat belt  
2.8  
Removing and installing front belt  
guide  
Removal and installation are described for left side of vehicle as  
an example.  
2. Seat belts  
59  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Removing  
– Remove upper B-pillar trim ⇒ Rep. gr. 70 ; Removing and  
installing upper B-pillar trim .  
– Unscrew bolts -2-, and remove front belt guide -1-.  
l
Installing  
Install in reverse order of removal, observing the following:  
Tightening torques  
♦ ⇒ Rep. gr. 69 ; Assembly overview – front three-point seat  
belt  
2.9  
Removing and installing belt height ad‐  
juster  
Removing  
– Remove upper B-pillar trim ⇒ Rep. gr. 70 ; Removing and  
installing upper B-pillar trim .  
60  
Rep. gr.69 - Passenger protection  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Move belt height adjustment slider -2- to lowest position.  
– Unscrew bolt -4-.  
– Remove belt guide fitting -1-.  
– Unscrew bolt -3-.  
– Pull belt height adjuster -2- upwards off B-pillar.  
Installing  
lk  
Install in reverse order of removal, observing the following:  
Note  
Belt height adjusters ordered as replacement parts always  
come with the adjustment slider set to the lowest position (as‐  
sembly position).  
Note  
If a previously removed belt height adjuster is reinstalled, the  
adjustment slider must be moved to the lowest position (assem‐  
bly position) before installing.  
Note  
The belt height adjuster must engage audibly in every possible  
position.  
Note  
The belt guide fitting must move to the vertical or operated  
position on its own as soon as the bolt has been tightened.  
Tightening torques  
♦ ⇒ Rep. gr. 69 ; Assembly overview – front three-point seat  
belt  
2.10  
Removing and installing front belt  
buckle  
Front belt buckle with driver-side belt switch - E24- or front  
passenger-side belt switch - E25- will henceforth be referred to  
as “front belt buckle”.  
Removal and installation are described for left side of vehicle as  
an example.  
2. Seat belts  
61  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Removing  
– Remove front seat ⇒ Rep. gr. 72 ; Removing and installing  
front seat .  
– Remove inner seat trim ⇒ Rep. gr. 72 ; Removing and  
installing inner seat trim .  
– Release clip -3-.  
– Disconnect electrical connector -4-.  
– Unscrew bolt -1-.  
– Remove front belt buckle -2-.  
lk  
Installing  
Install in reverse order of removal, observing the following:  
– Position belt buckle in such a way that anti-twist protection  
engages in recess in seat frame.  
Tightening torques  
♦ ⇒ Rep. gr. 69 ; Assembly overview – front belt buckle  
2.11  
Removing and installing rear belt buck‐  
le  
The rear right belt buckle with belt switch for seat row 2, right -  
F487- , rear left belt buckle with belt switch for seat row 2, left -  
F488- , rear left belt buckle with belt switch for seat row 3, rear  
left - E750- , rear right belt buckle with belt switch for seat row  
3, rear right - E751- and rear centre belt buckle with belt switch  
for seat row 3, centre - F394- will henceforth be referred to as  
“belt buckle”.  
Removal and installation are described for one belt buckle as  
an example.  
62  
Rep. gr.69 - Passenger protection  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Removing  
– Remove inner seat trim ⇒ Rep. gr. 72 ; Removing and  
installing inner seat trim .  
– Remove trim at rear of seat ⇒ Rep. gr. 72 ; Removing and  
installing seat trim .  
lk  
– Disconnect electrical connector -3-.  
– Unscrew bolt -2-.  
– Remove belt buckle -1-.  
Installing  
Install in reverse order of removal, observing the following:  
Tightening torques  
♦ ⇒ Rep. gr. 69 ; Assembly overview – rear belt buckle  
2. Seat belts  
63  

Related Topics

Passengerprotection

Safety information and repair notes
Safety information
Repair instructions
Assembly overview ? front three-point seat belt
Assembly overview ? rear outer three-point seat belt
Assembly overview ? rear centre three-point seat belt
Assembly overview ? front belt buckle
Assembly overview ? rear belt buckle
Removing and installing front three-point seat belt [NX10]/[NX11]
Removing and installing rear three-point seat belt
Removing and installing front belt guide
Removing and installing belt height adjuster
Removing and installing front belt buckle
Removing and installing rear belt buckle
Airbag control unit
Assembly overview ? airbag control unit
Removing and installing airbag control unit [J234]
Front airbag, driver side
Assembly overview ? front airbag, driver side
Removing and installing airbag unit with airbag igniter on driver side [N95]
Renewing connector on airbag
Front passenger airbag
Assembly overview ? front passenger airbag
Removing and installing front passenger airbag unit with igniter
Removing and installing key-operated switch to deactivate airbag on front passenger side [E224]
Side airbags
Assembly overview ? front side airbag, outer side
Assembly overview - front inner side airbag
Removing and installing front side airbag, outer side
Removing and installing front inner side airbag
Curtain airbags
Assembly overview ? curtain airbag
Removing and installing curtain airbag with igniter
Airbag crash sensors
Assembly overview - crash sensors for airbags
Removing and installing crash sensor for front airbag [G190]
Removing and installing front side airbag crash sensor [G179/G180]
Removing and installing rear side airbag crash sensor [G256/G257]
Removing and installing crash sensor for side airbag in B-pillar [G1101/G1102]
Seat occupied recognition
Removing and installing front seat occupied sensor [G1067]/[G128]
Removing and installing battery in control unit for wireless connection of seat occupied sensors
Removing and installing rear seat occupied sensor [G1116], [G1117], [G1118], [G1119], [G1120]
Removing and installing control unit for wireless connection of seat occupied sensors

Popular Owner Manuals

Audi
BMW
Citroen
Ford
Honda
Peugeot

Latest Owner Manuals

First Generation (1995-2006) Ford Galaxy Van First Generation (1995-2006) Ford Galaxy Van
Second Generation (2013-2023) Ford Ecosport SUV Second Generation (2013-2023) Ford Ecosport SUV
Fifth Generation (2012-2020) Ford Explorer SUV Fifth Generation (2012-2020) Ford Explorer SUV
Third Generation (2016-2021) Ford Ka 2 Door Third Generation (2016-2021) Ford Ka 2 Door
Second Generation (2009-2016) Ford Ka 2 Door Second Generation (2009-2016) Ford Ka 2 Door
First Generation (1996-2008) Ford Ka 2 Door First Generation (1996-2008) Ford Ka 2 Door