2024-2025 Volkswagen Multivan SUV Passengerprotection -> Removing and installing front side airbag, outer side User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Passengerprotection -> Removing and installing front side airbag, outer side for Your Volkswagen Multivan SUV Seventh Generation (2024-2025)

Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
1 - Front side airbag, inner  
side  
❑ With igniter for central  
airbag for occupant col‐  
lision protection, driver  
side - N737-  
❑ Fitted on driver side  
❑ ⇒ Rep. gr. 69 ; Re‐  
moving and installing  
front inner side airbag  
2 - Clip  
3 - Bolt  
❑ Qty. 3  
❑ Renew after removing  
❑ 8 Nm  
4 - Electrical connector  
6.3  
Removing and installing front side air‐  
bag, outer side  
The side airbag with side airbag igniter on driver side - N199- or  
side airbag igniter on front passenger side - N200- will hence‐  
forth be referred to as “side airbag”.  
Removal and installation are described for the left side of vehi‐  
cle as an example.  
Removing  
– Disconnect battery earth cable ⇒ Electrical system; Rep.  
gr. 27 ; Battery; Disconnecting and connecting battery .  
– Remove backrest padding in area of side airbag ⇒ Rep.  
gr. 74 ; Separating backrest cover from backrest padding .  
6. Side airbags  
77  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
CAUTION  
It is possible to trigger pyrotechnic components unintentional‐  
ly.  
Risk of injury  
– Discharge static electricity by briefly touching door striker  
plate.  
– Release connector lock -3- in direction of -arrow-.  
– Disconnect electrical connector -2-.  
– Unscrew bolt -1-.  
– Detach side airbag -4- from hook -5-, and remove it.  
lk  
WARNING  
Risk of injury due to unintended deployment of the airbag unit.  
– Place the airbag unit with the airbag facing upwards.  
– Place side airbag aside.  
Installing  
Install in reverse order of removal, observing the following:  
CAUTION  
It is possible to trigger pyrotechnic components unintentional‐  
ly.  
Risk of injury  
– Discharge static electricity by briefly touching door striker  
plate.  
78  
Rep. gr.69 - Passenger protection  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Connect electrical connector -1- in direction of -arrow A- until  
it engages audibly.  
– Engage connector lock -2- in direction of -arrow B-.  
– Make sure that electrical wire is not trapped.  
– Connect battery earth cable ⇒ Electrical system; Rep.  
gr. 27 ; Battery; Disconnecting and connecting battery .  
CAUTION  
lk  
Pyrotechnic components can trigger unintentionally.  
Risk of injury.  
– Keep far away from pyrotechnic components when switch‐  
ing on ignition.  
– Switch on ignition.  
– Read and clear event memory using ⇒ Vehicle diagnostic  
tester.  
Tightening torques  
⇒ “6.1 Assembly overview ? front side airbag, outer side”,  
page 76  
6.4  
Removing and installing front inner  
side airbag  
Side airbag with igniter for central airbag for occupant collision  
protection, driver side - N737- will henceforth be referred to as  
“side airbag”.  
Removing  
– Disconnect battery earth cable ⇒ Electrical system; Rep.  
gr. 27 ; Battery; Disconnecting and connecting battery .  
– ⇒ Rep. gr. 74 ; Separate backrest cover from backrest  
padding .  
6. Side airbags  
79  

Related Topics

Safety information and repair notes Safety information Repair instructions Seat belts Assembly overview ? front three-point seat belt Assembly overview ? rear outer three-point seat belt Assembly overview ? rear centre three-point seat belt Assembly overview ? front belt buckle Assembly overview ? rear belt buckle Removing and installing front three-point seat belt [NX10]/[NX11] Removing and installing rear three-point seat belt Removing and installing front belt guide Removing and installing belt height adjuster Removing and installing front belt buckle Removing and installing rear belt buckle Airbag control unit Assembly overview ? airbag control unit Removing and installing airbag control unit [J234] Front airbag, driver side Assembly overview ? front airbag, driver side Removing and installing airbag unit with airbag igniter on driver side [N95] Renewing connector on airbag Front passenger airbag Assembly overview ? front passenger airbag Removing and installing front passenger airbag unit with igniter Removing and installing key-operated switch to deactivate airbag on front passenger side [E224] Side airbags Assembly overview ? front side airbag, outer side Assembly overview - front inner side airbag Removing and installing front inner side airbag Curtain airbags Assembly overview ? curtain airbag Removing and installing curtain airbag with igniter Airbag crash sensors Assembly overview - crash sensors for airbags Removing and installing crash sensor for front airbag [G190] Removing and installing front side airbag crash sensor [G179/G180] Removing and installing rear side airbag crash sensor [G256/G257] Removing and installing crash sensor for side airbag in B-pillar [G1101/G1102] Seat occupied recognition Removing and installing front seat occupied sensor [G1067]/[G128] Removing and installing battery in control unit for wireless connection of seat occupied sensors Removing and installing rear seat occupied sensor [G1116], [G1117], [G1118], [G1119], [G1120] Removing and installing control unit for wireless connection of seat occupied sensors

Popular Owner Manuals