Lupo 1999 ➤ , Lupo 3L 1999 ➤
Maintenance - Edition 03.2018
4.13
Automated manual gearbox (DSG):
Carrying out basic setting
– Carry out basic setting of automated manual gearbox (DSG):
⇒ Vehicle diagnostic tester; vehicle diagnosis, testing and in‐
formation system or the - VAS 5051- or the vehicle diagnosis
and service information system - VAS 5052- in function “gui‐
ded fault finding”.
Procedure: »5-speed manual gearbox 085 DS« ⇒ 5-speed man‐
ual gearbox 085 DS ; Rep. gr. 34 ; Controls, housing; Changing
oil and filter of dual clutch gearbox »Controls, housing; Changing
oil and filter of dual clutch gearbox«
4.14
Service interval display: Resetting
Function
The service interval display electronics is comprised of, amongst
other items:
♦ a time recorder
and
♦ two distance recorders.
The electronics evaluates both recorders so that the customer
♦ after a predetermined time period is exceeded or
or
♦ after a predetermined distance is reached
is informed via the service interval display that a service is re‐
quired (whichever occurs first).
Service interval display
Between services, only the total distance and distance travelled
(trip recorder) is shown in the distance display -2-.
If a service is due, the following is indicated in the distance display
-2- below the total mileage:
♦ with ignition switched off “service”
♦ after the ignition is switched on and up to 3 minutes after the
engine is started the type of service (see table).
Note
After the engine is started the display switches back to “service”
after 3 minutes.
4. Descriptions of work:
43
English 
