1998-2005 Volkswagen Lupo 2 Door Descriptions of work -> Driver and front passenger airbags: Visual check of airbag units User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Descriptions of work -> Driver and front passenger airbags: Visual check of airbag units for Your Volkswagen Lupo 2 Door First Generation (1998-2005)

Lupo 1999 ➤ , Lupo 3L 1999 ➤  
Maintenance - Edition 03.2018  
4.8.2  
Engine code AMF  
– Pull dipstick out again and read oil level.  
♦ Area -a-: Oil must be replenished. After replenishing it is suf‐  
ficient when the oil level is somewhere in area -b-.  
♦ Area -b-: Oil must not be replenished.  
♦ Area -b-: Oil must not be replenished.  
Note  
A danger exists of damaging the catalytic converter when oil level  
is above area -c-.  
4.8.3  
Engine codes ANY, AYZ  
– Pull dipstick out again and read oil level.  
♦ Area -a-: Oil must be replenished. After replenishing it is suf‐  
ficient when the oil level is somewhere in area -b-.  
♦ Area -b-: Oil must not be replenished.  
♦ Area -b-: Oil must not be replenished.  
Note  
A danger exists of damaging the catalytic converter when oil level  
is above area -c-.  
Continued for all vehicles:  
– When oil level is below min. marking, replenish with oil to max.  
marking. Oil specification: Petrol engines and diesel engines  
4.9  
Driver and front passenger airbags: Vis‐  
ual check of airbag units  
4.9.1  
Driver side airbag:  
Airbag recognition, is via the inscription “AIRBAG” on the steering  
wheel padded plate.  
– Carry out visual check of padded plate -1- for exterior damage.  
WARNING  
♦ The steering wheel padded plate surface must not have  
stickers attached or be covered or otherwise be modified.  
This ensures that the future function of the airbag is guar‐  
anteed. Ensure the customer is aware of these instruc‐  
tions.  
♦ The steering wheel padded plate must only be cleaned  
with a dry cloth or a cloth moistened with water.  
4. Descriptions of work:  
33  
Lupo 1999 ➤ , Lupo 3L 1999 ➤  
Maintenance - Edition 03.2018  
4.9.2  
Front passenger airbag:  
Airbag recognition by the inscription “AIRBAG” on the right-hand  
side of dash panel (front passenger side).  
– Carry out visual check of dash panel surface -2- for exterior  
damage.  
WARNING  
♦ The surface of the front passenger airbag module must  
not have stickers attached or be covered or be modified  
otherwise. This ensures that the future function of the air‐  
bag is guaranteed. Ensure the customer is aware of these  
instructions.  
♦ The surface of the airbag module must only be cleaned  
with a dry cloth or a cloth moistened with water.  
4.10  
Window wiper and washer system and  
headlight washer system: Checking  
function  
Note  
When during a functional check it is determined that the wiper  
blades “judder” or make noises, check the setting angle of the  
wiper blades ⇒ page 38 .  
4.10.1  
Replenishing with fluid  
Special tools and workshop equipment required  
♦ Refractometer - T10007-  
The fluid reservoir of the window washer system must be filled  
completely. If fluid has to be replenished, add Windscreen Clear  
- G 052 164- to the water.  
34  
4. Descriptions of work:  

Related Topics

Descriptions of work
Removing and installing engine compartment cover (noise insulation) Battery: checking battery terminal clamps for secure seating Battery: Check Wheel bolts: tightening to specified torque Clock: setting to correct time Radio: Activating anti-theft coding Transportation devices: removing blocking pieces from springs on front axle Engine oil level: Check, replenish if necessary Window wiper and washer system and headlight washer system: Checking function Wiper blades: Checking for damage; checking park position... Carry out vehicle system test Automated manual gearbox (DSG): Carrying out basic setting Service interval display: Resetting Door arrester: grease Sunroof: checking function, cleaning and greasing guide rails Folding fabric sunroof: Cleaning and greasing guide rails Engine and components in engine compartment: inspecting for leaks and damage Cooling system: checking frost protection and coolant level Air filter: Cleaning housing and renewing filter element Spark plugs: Renewing Power assisted steering: Check fluid level Fuel filter: Renewing (diesel engine) Fuel filter: Draining water (diesel engine) Dust and pollen filter: renew filter element Toothed belt: Checking for wear (diesel engine ?2000) Camshaft drive toothed belt: Checking (4-cylinder petrol engine) Toothed belt: Renewing (diesel engine with engine code AKU) Toothed belt and camshaft drive tensioning roller: Renewing (diesel engine) Engine oil: Draining or extracting and replenishing; renewing oil filter Poly V-belt: checking condition Boots: inspecting Manual gearbox/final drive: Checking oil level, filling oil as required Automated manual gearbox (DSG): Checking oil level, filling hydraulic oil as required Brake system: inspect for leaks and damage Front and rear brake pads/linings: Check thickness Underbody protection: Carry out visual check for damage Track rod ends: checking clearance, firm seating and boots Swivel joints: inspecting Checking breakdown set Tyres (including spare wheel): Checking condition and wear pattern Tyre tread depth (including spare wheel): Checking Tyre pressure (including spare wheel): Checking, correcting if necessary Automatic gearbox: Checking ATF level, filling ATF as required Brake and clutch system: Changing brake fluid Brake fluid level (dependent upon brake pad/lining wear): check Headlight adjustment: Checking, adjusting if necessary Carry out road test

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot