Lupo 1999 ➤ , Lupo 3L 1999 ➤
Maintenance - Edition 03.2018
– Press lugs -arrows- together and remove cover upwards.
– Check battery terminal clamps -3- and -4- are seated securely
on the battery terminals by moving the battery positive wire
-1- and -5- and the battery negative wire -2- to and fro.
WARNING
If the battery terminal clamp is not seated securely on the pos‐
itive terminal, first disconnect battery earth clamp on battery
negative terminal to prevent possible accidents.
If the battery clamp is not seated securely on positive terminal:
– Disconnect battery terminal clamp -4- from battery negative
terminal first.
– Tighten battery clamp -3- on battery positive terminal to 5 Nm.
– Reconnect battery clamp -4- to battery negative terminal and
tighten to 5 Nm.
If the battery clamp on negative terminal is not seated securely:
– Tighten battery clamp -4- on battery negative terminal to 5 Nm.
4.3
Battery: Check
– Procedure: »Electrical system« ⇒ Electrical system; Rep. gr.
27 ; Checking battery »Checking battery«
4.4
Wheel bolts: tightening to specified tor‐
que
Special tools and workshop equipment required
28
4. Descriptions of work:
English 
