1998-2005 Volkswagen Lupo 2 Door Descriptions of work -> Engine oil level: Check, replenish if necessary User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Descriptions of work -> Engine oil level: Check, replenish if necessary for Your Volkswagen Lupo 2 Door First Generation (1998-2005)

Lupo 1999 ➤ , Lupo 3L 1999 ➤  
Maintenance - Edition 03.2018  
– Push blocking pieces -arrows- off piston rod.  
– Slide suspension strut protective sleeve downwards onto sus‐  
pension strut.  
4.8  
Engine oil level: Check, replenish if nec‐  
essary  
Please note the following:  
After shutting off engine, wait at least 3 minutes so that the oil can  
flow back into the sump.  
– Pull out dipstick, wipe with a clean cloth and push dipstick in  
again to limit stop.  
Note  
Observe environmental regulations for disposal.  
4.8.1  
Engine codes AER, AFK, AHT, AHW,  
AKU, AKQ, ALD, ALL, ANV, APE, AQQ,  
ARR, AUA, AUB, AUC, AUD, AVY, BBY  
– Pull dipstick out again and read oil level.  
♦ Area -a-: Oil must be replenished. After replenishing it is suf‐  
ficient when the oil level is somewhere in area -b-.  
♦ Area -b-: Oil must not be replenished.  
♦ Area -b-: Oil must not be replenished.  
Note  
A danger exists of damaging the catalytic converter when oil level  
is above area -c-.  
32  
4. Descriptions of work:  
Lupo 1999 ➤ , Lupo 3L 1999 ➤  
Maintenance - Edition 03.2018  
4.8.2  
Engine code AMF  
– Pull dipstick out again and read oil level.  
♦ Area -a-: Oil must be replenished. After replenishing it is suf‐  
ficient when the oil level is somewhere in area -b-.  
♦ Area -b-: Oil must not be replenished.  
♦ Area -b-: Oil must not be replenished.  
Note  
A danger exists of damaging the catalytic converter when oil level  
is above area -c-.  
4.8.3  
Engine codes ANY, AYZ  
– Pull dipstick out again and read oil level.  
♦ Area -a-: Oil must be replenished. After replenishing it is suf‐  
ficient when the oil level is somewhere in area -b-.  
♦ Area -b-: Oil must not be replenished.  
♦ Area -b-: Oil must not be replenished.  
Note  
A danger exists of damaging the catalytic converter when oil level  
is above area -c-.  
Continued for all vehicles:  
– When oil level is below min. marking, replenish with oil to max.  
marking. Oil specification: Petrol engines and diesel engines  
4.9  
Driver and front passenger airbags: Vis‐  
ual check of airbag units  
4.9.1  
Driver side airbag:  
Airbag recognition, is via the inscription “AIRBAG” on the steering  
wheel padded plate.  
– Carry out visual check of padded plate -1- for exterior damage.  
WARNING  
♦ The steering wheel padded plate surface must not have  
stickers attached or be covered or otherwise be modified.  
This ensures that the future function of the airbag is guar‐  
anteed. Ensure the customer is aware of these instruc‐  
tions.  
♦ The steering wheel padded plate must only be cleaned  
with a dry cloth or a cloth moistened with water.  
4. Descriptions of work:  
33  

Related Topics

Descriptions of work
Removing and installing engine compartment cover (noise insulation) Battery: checking battery terminal clamps for secure seating Battery: Check Wheel bolts: tightening to specified torque Clock: setting to correct time Radio: Activating anti-theft coding Transportation devices: removing blocking pieces from springs on front axle Driver and front passenger airbags: Visual check of airbag units Window wiper and washer system and headlight washer system: Checking function Wiper blades: Checking for damage; checking park position... Carry out vehicle system test Automated manual gearbox (DSG): Carrying out basic setting Service interval display: Resetting Door arrester: grease Sunroof: checking function, cleaning and greasing guide rails Folding fabric sunroof: Cleaning and greasing guide rails Engine and components in engine compartment: inspecting for leaks and damage Cooling system: checking frost protection and coolant level Air filter: Cleaning housing and renewing filter element Spark plugs: Renewing Power assisted steering: Check fluid level Fuel filter: Renewing (diesel engine) Fuel filter: Draining water (diesel engine) Dust and pollen filter: renew filter element Toothed belt: Checking for wear (diesel engine ?2000) Camshaft drive toothed belt: Checking (4-cylinder petrol engine) Toothed belt: Renewing (diesel engine with engine code AKU) Toothed belt and camshaft drive tensioning roller: Renewing (diesel engine) Engine oil: Draining or extracting and replenishing; renewing oil filter Poly V-belt: checking condition Boots: inspecting Manual gearbox/final drive: Checking oil level, filling oil as required Automated manual gearbox (DSG): Checking oil level, filling hydraulic oil as required Brake system: inspect for leaks and damage Front and rear brake pads/linings: Check thickness Underbody protection: Carry out visual check for damage Track rod ends: checking clearance, firm seating and boots Swivel joints: inspecting Checking breakdown set Tyres (including spare wheel): Checking condition and wear pattern Tyre tread depth (including spare wheel): Checking Tyre pressure (including spare wheel): Checking, correcting if necessary Automatic gearbox: Checking ATF level, filling ATF as required Brake and clutch system: Changing brake fluid Brake fluid level (dependent upon brake pad/lining wear): check Headlight adjustment: Checking, adjusting if necessary Carry out road test

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot