Lupo 1999 ➤ , Lupo 3L 1999 ➤
Maintenance - Edition 03.2018
– Pull spray jet -arrow- out onto stop and align onto respective
spray point with adjusting tool - 3019 A-
Note
If the spray field is uneven due to soiling in the spray jet, remove
spray jet, and rinse with water opposite to direction of spray. Sub‐
sequent blowing through with compressed air against the spray‐
ing direction is permitted. Never use solid objects to clean the
washer jets!
4.11
Wiper blades: Checking for damage;
checking park position, adjusting if nec‐
essary; if wiper blades “judder”: Check‐
ing setting angle, adjusting if necessary
4.11.1
Wiper blades: Checking park position,
adjusting if necessary
Special tools and workshop equipment required
♦ Torque wrench - V.A.G 1331- (5-50 Nm)
Windscreen of LHD vehicles:
– Check park position.
Driver side:
The distance -A- between wiper blade and lower edge of wind‐
screen must be 20 mm.
– Adjust park position by moving wiper arm if necessary.
Specified torque for wiper arm: 20 Nm
38
4. Descriptions of work:
English 
