Driving
You can start the system manually in
the ADAS touch screen application.
Malfunction
Muting the audible assistance / Closing
the visual assistance
6
If the audible detection signal is muted or
the system display window is closed by the
driver during the obstacle detection, only
the warning lamp continues to flash on the
instrument panel.
In case of display or speakers malfunction
(e.g. frozen image, black screen), the
system may be disturbed or unavailable.
In the event of vehicle malfunction that
requires the vehicle to be stopped, the
system may be deactivated.
Front parking sensors
Supplementing the rear parking sensors, the
front parking sensors are triggered when an
obstacle is detected in front and the speed of
the vehicle is below 6 mph (10 km/h).
Front parking sensor operation is suspended if
the vehicle stops for more than three seconds in
forward gear, if an obstacle is no longer detected
or the vehicle speed exceeds 6 mph (10 km/h).
In the event of a temporary
malfunction (e.g. untimely triggering
due to external noise sources or other
interferences), this warning lamp lights
up on the instrument panel, accompanied by
the display of a message and an audible signal
(short beep).
In the event of a permanent malfunction, this
warning lamp lights up on the instrument panel,
accompanied by the display of a message and
an audible signal (long beep).
The rear parking sensors are deactivated
automatically if a trailer or bicycle carrier
is connected to a towing device installed
in accordance with the Manufacturer's
recommendations.
In this case, the outline of a trailer is
displayed at the rear of the image of the
vehicle.
The sound emitted by the speaker (front
or rear) locates the obstacle relative to the
vehicle, whether in front of or behind it on its
path.
When starting the vehicle, the graphic and
audible aids are only available after the
touch screen has started up.
Have it checked by a PEUGEOT dealer or a
qualified workshop.
This warning lamp lights up on the
instrument panel with the message
"Parking Assistance Sensor blind:
Clean sensor, see User Manual" if
the sensor is masked.
This is a normal behavior, which does not
request the support of a qualified workshop.
In this case, stop the vehicle and verify if the
front and/or rear sensors are covered by dirt,
mud, sand, snow, ice or anything preventing the
sensing.
Deactivation/Activation
Operating limits
(Depending on country of sale)
By default, the audible signal is automatically
activated at each backing movement of the
vehicle.
If the boot is heavily loaded, the vehicle may tilt,
affecting distance measurements.
In case of a gearbox failure, the system is not
active, when the reverse gear is engaged.
The system cannot be
deactivated.
The system is operational again after the
detection field has been cleaned.
161
English 