Driving
Information displayed on
the instrument panel
Temporarily exceeding the
speed setting
When the speed setting remains below the
vehicle's speed for a prolonged period of
time, an audible warning is emitted.
6
► Fully depress the accelerator pedal.
Adjusting the speed setting
The speed limiter is temporarily deactivated and
the displayed speed setting flashes.
You do not have to switch the speed limiter on in
order to set the speed.
To change the speed setting using the vehicle’s
current speed:
► Release the accelerator pedal to return to
below the speed setting.
When exceeding the speed is not due to the
driver's action (e.g. in case of a steep slope), an
audible signal is triggered immediately.
► For steps of +/- 1 mph (1 km/h), make
successive short presses on 3 to increase or
on 4 to decrease.
On a steep descent or in the event of
6 sharp acceleration, the speed limiter
will not be able to prevent the vehicle from
exceeding the speed setting.
If necessary, apply the brakes to control your
vehicle’s speed.
► For steps of +/- 5 mph (5 km/h), press and
hold on 3 to increase or on 4 to decrease.
6. Speed limiter mode selection indication
7. Speed limiter on (green)/Pause (grey)
indication
8. Speed setting value
9. Speed suggested by the Road signs
recognition function (depending on version)
When the function is activated, the limit
speed value can be changed using the speed
suggested by the Road signs recognition
function displayed on the instrument panel:
– When passing the sign:
When the vehicle speed returns to the speed
setting level, the speed limiter operates again:
the speed setting display becomes fixed again.
► Press 5-OK to save the suggested speed.
Switching on/Pausing
This value is then immediately shown as the new
speed setting on the instrument panel.
– After passing the sign:
► Press 1-LIMIT to select the speed limiter
Off
mode; the function is paused (grey).
► Press 1-LIMIT: the speed limiter information
► If the limit speed setting is suitable (most
recent speed setting programmed in the
system), press 2-II> or 5-OK to switch the
speed limiter on (green).
► Press 5-OK. The message "OK?" is
display disappears.
displayed to confirm the request to save.
► Press 5-OK again to save the suggested
speed. The new speed setting value is
displayed on the instrument panel.
Malfunction
► Pressing 2-II> again temporarily pauses the
In the event of a malfunction, dashes are
displayed flashing and then fixed instead of the
speed setting.
function.
Have it checked by a PEUGEOT dealer or a
qualified workshop.
133
English 