Driving
This button allows to trig the camera
washing (depending on equipment).
Operating principle
Visiopark 1
For more information, refer to the General
recommendations on the use of driving
and manoeuvring aids.
Activation/Deactivation
To activate the camera, engage reverse gear.
The system is deactivated:
– when changing out of reverse gear and speed
greater than 6 mph (10 km/h) in forward gear.
– by pressing the cross in the top left-hand
corner of the touch screen.
When reverse gear is engaged, with the engine
running, this system displays views of the
vehicle's close surroundings on the touch screen
using a camera located at the rear of the vehicle.
Using the camera, the vehicle's close
surroundings are recorded during low speed
manoeuvres.
Automatic zoom view
An image from above the vehicle in its close
surroundings is created in real time (on the side
of the screen), as the vehicle progresses.
This view makes it easier to align the vehicle
when parking and to perceive nearby obstacles.
It is automatically deleted if the vehicle remains
stationary for too long.
The screen is divided into 4 parts with two side
menus, a contextual view and a view from above
the vehicle in its close surroundings.
The parking sensors supplement the information
in the view from above the vehicle.
Different contextual views are available:
– Automatic zoom view.
– Standard view.
– Panoramic view.
Depending on the context, the system chooses
the best view to display (standard or automatic
zoom).
The rear camera records the vehicle's
surroundings during the manoeuvre in order to
create a view from above the rear of the vehicle
in its close surroundings, allowing the vehicle to
be manoeuvred around nearby obstacles.
Using the sensors located on the rear bumper,
the automatic zoom view is displayed when
approaching an obstacle at close distance during
the manoeuvre.
An additional jet is fitted above the number
plate to clean the reversing camera
(depending on version).
Settings
In the side menu:
This window allows to adjust the vol-
ume of the audible signal.
This view is only available automatically.
The view type can be changed at any time
during the manoeuvre.
This button allows to mute/unmute
the audible signal.
The system status is not saved when the ignition
is switched off.
162
English 