Get Driving -> Road signs recognition Guide for Peugeot 5008 SUV Third Generation (2024-2025)

Driving

Deactivation of these functions

Suggested speed

(calculated)

Without PEUGEOT i-

Connect Advanced /

PEUGEOT Connect

Nav

10 mph or 20 km/h

(depending on the

units on the instru-

ment panel)

With PEUGEOT i-

Connect Advanced /

PEUGEOT Connect

Nav

► Press this button to access directly to the

Sign detected

Shortcuts tab.

► Press and hold this but-

ton on the dashboard.

Multiple deactivation

It is possible to deactivate several driver

assistance functions simultaneously.

This is done in two steps:

– First of all, the selection of all the functions that

you want to deactivate.

All previously selected functions are deactivated

until the vehicle is next restarted (confirmed by

an audible signal).

Entry into a shared

traffic zone

Example:

Road signs recognition

– Secondly, the simultaneous deactivation of all

these functions.

For more information, refer to the General

recommendations on the use of driving

and manoeuvring aids.

Selection of functions

Display of the speed

in force in the country

you are driving in.

► Press this button on the dash-

board to display the ADAS tabs.

► Select the Functions tab.

► Press this button to display the

list of available functions.

– Some supplementary traffic signs detected by

the camera.

Display of the speed

Supplementary traf-

fic sign detected

associated with the

supplementary traf-

fic sign

► Select the functions that will be deactivated

by a long press on the ADAS button at each

start (e.g. Stop&Start, Lane Keeping Assist,

Automatic Braking System (Active Safety

Brake)).

If the wiper control

stalk is in the "inter-

mittent wipe" or "au-

tomatic wipe" position

(in order to activate

the rain sensor): 68

mph (110 km/h) (for

example)

If an approved towing

device is fixed to the

vehicle: 56 mph (90

km/h) (for example)

Speed limit when

raining

This system displays the maximum speed

authorised locally on the instrument panel, using:

– Speed limit signs detected by the camera.

– Speed limit information from the on-board

navigation system’s mapping.

– Speed limit information from the connected

services.

– Signs indicating a shared traffic zone detected

by the camera.

Examples:

► Press this button to return to the

previous page.

The functions to deactivate are saved in the

system.

Speed limit when

towing

128

Driving

Display of the speed

associated with the

supplementary traf-

fic sign

To get valid speed limit information, the

vehicle's current position is sent via the

telematics unit and is immediately deleted

after processing.

Tracking of the vehicle position is not possible

at any time.

Specific speed limits, such as those for

Supplementary traf-

fic sign detected

heavy goods vehicles, are not displayed.

The display of the speed limit on the

instrument panel is updated when passing

a speed limit sign intended for cars (light

vehicles).

Speed limit applica-

ble over a certain

distance

43 mph (70 km/h) (for

example)

This is not impacted by the privacy settings of

the connected services.

Example:

Information displayed on

the instrument panel

On-board navigation mapping should be

regularly updated in order to receive

accurate speed limit information from the

system.

Display of the speed

associated with the

supplementary traf-

fic sign

Supplementary traf-

fic sign detected

1. Detected speed limit indication

2. End of speed limit indication

Speed limit for ve-

hicles with a gross

vehicle weight or

gross train weight

less than 3.5 tonnes

The units for the speed limit (mph or km/h)

depend on the country you are driving in.

This should be taken into account to ensure

you observe the speed limit.

For the system to work properly when

changing countries, the speed unit of the

instrument panel must match that of the

country you are driving in.

56 mph (90 km/h) (for

example)

The system is active but is not detecting speed

limit information.

Speed limit in case

of snow

If the outside temper-

ature is below 3°C: 19

mph (30 km/h) (for ex-

ample) with a "snow-

flake" symbol

Country selection is only available for audio

systems without on-board navigation.

Example:

Automatic sign reading is a driving aid

system and does not always display the

correct speed limits.

The speed limit signs present on the road

always take priority over those displayed by

the system.

The system is designed to detect signs that

6 conform to the Vienna Convention on road

signs.

Speed limit at cer-

tain times of the day

Example:

On detecting speed limit information, the system

displays the value, accompanied by an audible

signal.

19 mph (30 km/h)

(for example) with a

"clock" symbol

This audible signal is emitted if the Speed

limit change sound is activated previously

in the Road Signs function of the ADAS

touch screen application.

129

Driving

Settings

Malfunction

This warning lamp lights up on the

Deactivation/Activation

instrument panel with the message

"Audible Warning System fault:

Repair needed" if the audible warn-

ing system is in failure.

By default, the overspeed alert sound is

automatically activated at every engine start.

For a suggested maximum speed, when the

vehicle exceeds it, the speed is displayed and

flashes for several seconds.

You can activate/deactivate the over-

speed alert and the speed limit

change sound.

The system may be disturbed or unavailable.

Have it checked by a PEUGEOT dealer or a

qualified workshop.

or Direct access to the Shortcuts for driving

aids.

In the event of a malfunction, this

warning lamp lights up on the instru-

ment panel, accompanied by the dis-

play of a message and an audible

signal.

If the vehicle continues to exceed it, the speed

is displayed and flashes for a few more seconds,

accompanied by an audible signal.

The system cannot be deactivated.The

state of speed limit change is saved when

the ignition is switched off.

Operating limits

Have it checked by a PEUGEOT dealer or a

qualified workshop.

In the event of the overspeed alert

sound deactivation, this warning

lamp lights up a few seconds on the

instrument panel.

The system does not take account of reduced

speed limits, especially those imposed in the

following cases:

– Atmospheric pollution.

– Towing.

This warning lamp lights up on the

instrument panel with the message

"Driving Assistance Sensor blind:

Clean sensor, see User Manual" if

the sensor is masked.

Country selection

The list of detected road signs can be updated

by selecting a specific country.

– Driving with a space-saver type spare wheel or

snow chains fitted.

This is a normal behavior, which does not

request the support of a qualified workshop.

In this case, stop the vehicle and verify if the

front camera is covered by dirt, mud, sand,

snow, ice or anything preventing the sensing.

The system is operational again after the

detection field has been cleaned.

– Tyre repaired using the temporary puncture

repair kit.

– Young drivers.

The system may not display the speed limit if it

does not detect a speed limit sign within a preset

period and in the following situations:

– Non-standard road signs.

► In the ADAS touch screen appli-

cation, select Functions>Road

Signs>Country setting.

► In the Select Country list, select the desired

country.

– Road signs that are obstructed, damaged or

bent.

The current country is displayed under the

function name in the settings screen.

The country selection is saved when the

ignition is switched off.

130

Download User Manual App

Driving -> Road signs recognition for Your Peugeot 5008 SUV Third Generation (2024-2025)

Related Topics

Driving

Popular Owner Manuals

Latest Owner Manuals