Get Driving -> Visiopark 3 Guide for Peugeot 5008 SUV Third Generation (2024-2025)

Driving

Panoramic view

Obstacles may appear further away than

they actually are.

It is important to monitor the sides of the

vehicle during the manoeuvre, using the

mirrors.

Parking sensors also provide additional

information about the area around the

vehicle.

The panoramic view allows you to leave, in

reverse, a parking space by anticipating the

arrival of vehicles, pedestrians or cyclists.

This view is not recommended for carrying out a

complete manoeuvre.

Standard view

The screen is divided into 4 parts with two side

menus, a contextual view and a view from above

the vehicle in its close surroundings.

The parking sensors supplement the information

in the view from above the vehicle.

Depending on the view angle chosen in the

left-hand side menu, the system provides

specific visual assistance in particular driving

conditions, such as entering a blind intersection

or manoeuvring in areas with reduced visibility.

Different contextual views are available for the

rear or for the front:

– Automatic zoom view.

– Standard view.

– Panoramic view.

Depending on the context, the system chooses

the best view to display (standard or automatic

zoom).

The view type can be changed at any time

during the manoeuvre.

This view is only available by selection in the

side menu.

Visiopark 3

The area behind the vehicle is displayed on the

screen.

The blue lines 1 represent the width of your

vehicle, with the mirrors unfolded; their direction

changes according to the position of the steering

wheel.

The red line 2 represents a distance of 30 cm

from the rear bumper; the two blue lines 3 and 4

represent 1 m and 2 m, respectively.

This view is available automatically or by

selection in the side menu.

For more information, refer to the General

recommendations on the use of driving

and manoeuvring aids.

This system allows you to view your vehicle's

close surroundings on the touch screen using

cameras, located at the front and rear of the

vehicle, as well as under the door mirrors.

The system status is not saved when the ignition

is switched off.

163

Driving

This button allows to mute/unmute

the audible signal.

Operating principle

Automatic zoom view

Reconstructed view

This button allows to trig the camera

washing (depending on equipment).

The cameras are activated and a reconstruction

of a view from above your vehicle in its close

surroundings is displayed on the touch screen.

Live view

Activation/Deactivation

The front or rear camera records the

surroundings during the manoeuvre to create

a front or rear view from above the vehicle

in its close surroundings, making it possible to

manoeuvre the vehicle around the surrounding

obstacles.

Using the sensors located on the front or rear

bumper, the automatic zoom view is displayed

when approaching an obstacle at close distance

during the manoeuvre.

Automatic

With the rear camera, engine running and

vehicle stationary, rear vision is displayed

automatically if reverse gear is engaged.

With the front camera, engine running and speed

below 10 mph (16 km/h), rear vision is displayed

automatically if a reverse gear is engaged.

The front, rear and side views automatically

appear in the view from above the vehicle.

It is also possible to display any live view by

selecting the corresponding zone.

The front view can be selected in forward gear

up to 10 mph (16 km/h).

Manual

► In the ADAS touch screen appli-

cation, select Functions>Panor-

amic Camera

This view is only available automatically.

Depending on version, it can be activated/

deactivated in the ADAS touch screen

application.

Installing the very cold climate screen can

alter the image transmitted by the front

camera.

The system is deactivated:

– automatically for the rear, when changing out

of reverse gear.

► Select Functions>Panoramic camera, and

then its setting menu.

– automatically for the front, above

approximately 10 mph (16 km/h).

– by pressing the cross in the top left-hand

corner of the touch screen.

An additional jet is fitted above the number

plate to clean the reversing camera

(depending on version).

Obstacles may appear further away than

they actually are.

It is important to monitor the sides of the

vehicle during the manoeuvre, using the

mirrors.

Parking sensors also provide additional

information about the area around the

vehicle.

Settings

In the side menu:

This window allows to adjust the vol-

ume of the audible signal.

164

Download User Manual App

Driving -> Visiopark 3 for Your Peugeot 5008 SUV Third Generation (2024-2025)

Related Topics

Driving

Popular Owner Manuals

Latest Owner Manuals