Trim,insulation -> Dash panel for Your Volkswagen Multivan SUV Seventh Generation (2024-2025)

Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
lk  
4
Dash panel  
4.1  
Assembly overview - dash panel  
The overview shows a left-hand drive vehicle as an example.  
For right-hand drive vehicles, the layout is a mirror image.  
4. Dash panel  
113  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
1 - Bolt  
❑ Qty. 18  
⇒ page 115  
❑ 1.5 Nm  
2 - Centre dash panel cover  
❑ Top  
❑ ⇒ Rep. gr. 70 ; Re‐  
moving and installing  
centre dash panel cov‐  
er  
3 - Cover for dash pan‐  
el/head-up display  
❑ ⇒ Rep. gr. 70 ;  
Removing and instal‐  
ling cover for dash pan‐  
el/head-up display  
4 - Dash panel storage com‐  
partment  
❑ Depending on equip‐  
ment/installation period  
❑ ⇒ Rep. gr. 70 ;  
Removing and instal‐  
ling dash panel storage  
compartment  
5 - Loudspeaker trim  
❑ Depending on equip‐  
ment/installation period  
❑ ⇒ Rep. gr. 70 ; Re‐  
moving and installing  
loudspeaker trim  
6 - Mounting for loudspeaker  
❑ Depending on equip‐  
ment/installation period  
❑ ⇒ Rep. gr. 70 ; Removing and installing loudspeaker mounting  
7 - Side defroster vent  
❑ ⇒ Rep. gr. 70 ; Removing and installing side defroster vent  
8 - Dash panel end cover  
❑ Front passenger side  
❑ ⇒ Rep. gr. 70 ; Removing and installing dash panel end cover  
9 - Outer dash panel vents  
❑ ⇒ Rep. gr. 70 ; Removing and installing outer dash panel vents  
10 - Dash panel trim panel  
❑ Front passenger side  
❑ ⇒ Rep. gr. 70 ; Removing and installing dash panel trim  
11 - Centre dash panel cover  
❑ Bottom  
❑ ⇒ Rep. gr. 70 ; Removing and installing centre dash panel cover  
12 - Centre vent  
❑ ⇒ Rep. gr. 70 ; Removing and installing centre vent  
13 - MMI screen cover  
❑ ⇒ Rep. gr. 70 ; Removing and installing cover for MMI screen  
114  
Rep. gr.70 - Trim, insulation  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
14 - Dash panel insert trim  
❑ ⇒ Rep. gr. 70 ; Removing and installing trim for dash panel insert  
15 - Dash panel trim panel  
❑ Driver side  
❑ ⇒ Rep. gr. 70 ; Removing and installing dash panel trim  
16 - Outer dash panel vents  
❑ ⇒ Rep. gr. 70 ; Removing and installing outer dash panel vents  
17 - Dash panel  
❑ ⇒ Rep. gr. 70 ; Removing and installing dash panel  
lk  
18 - Dash panel end cover  
❑ Driver side  
❑ ⇒ Rep. gr. 70 ; Removing and installing dash panel end cover  
19 - Side defroster vent  
❑ ⇒ Rep. gr. 70 ; Removing and installing side defroster vent  
Dash panel – specified torque and tightening sequence  
Bolts  
Specified torque/turning fur‐  
ther angle  
-1- through -14-  
1.5 Nm  
4.2  
Removing and installing dash panel  
end cover  
4.2.1  
Removing and installing dash panel  
end cover, driver side  
Removal and installation are described for a left-hand drive  
vehicle as an example.  
4. Dash panel  
115  
lk  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Removing  
– Release retaining clips -2- using a commercially available  
plastic wedge, and remove dash panel end cover -1-.  
Installing  
Install in reverse order of removal, observing the following:  
– Restore sealing lip of door seal to installation position.  
4.2.2  
Removing and installing dash panel  
end cover, front passenger side  
Removal and installation are described for a left-hand drive  
vehicle as an example.  
Removing  
– Release retaining clips -3- with a commercially available  
plastic wedge, and pull off dash panel end cover -1- far  
enough to gain access to electrical connector.  
– Disconnect electrical connector -2-.  
– Remove dash panel end cover -1-.  
116  
Rep. gr.70 - Trim, insulation  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Installing  
Install in reverse order of removal, observing the following:  
lk  
– Restore sealing lip of door seal to installation position.  
4.3  
Removing and installing dash panel  
trim  
4.3.1  
Removing and installing dash panel  
trim, driver side  
Special tools and workshop equipment required  
♦ removal wedge set - VAS 895 015-  
The dash panel trim on driver side will henceforth be referred to  
as “trim panel”.  
Removal and installation are described for a left-hand drive  
vehicle as an example.  
Removing  
– Lever off trim panel -1- using removal wedge from removal  
wedge set - VAS 895 015- , and remove it.  
Installing  
Install in reverse order of removal.  
4.3.2  
Removing and installing dash panel  
trim, passenger side  
Special tools and workshop equipment required  
♦ removal wedge set - VAS 895 015-  
The dash panel trim on front passenger side will henceforth be  
referred to as “trim panel”.  
Removal and installation are described for a left-hand drive  
vehicle as an example.  
4. Dash panel  
117  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Removing  
– Lever off trim panel -1- using removal wedge from removal  
wedge set - VAS 895 015- , and remove it.  
Installing  
Install in reverse order of removal, observing the following:  
lk  
– Clip in dash panel trim on front passenger side starting at  
driver side.  
4.4  
Removing and installing cover for MMI  
screen  
Special tools and workshop equipment required  
♦ removal wedge set - VAS 895 015-  
The MMI screen cover will henceforth be referred to as “cover”.  
Removal and installation are described for a left-hand drive  
vehicle as an example.  
Removing  
– Remove dash panel trim on front passenger side ⇒ Rep.  
gr. 70 ; Removing and installing dash panel trim .  
– Remove dash panel insert trim ⇒ Rep. gr. 70 ; Removing  
and installing dash panel insert trim .  
118  
Rep. gr.70 - Trim, insulation  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Unscrew bolt -2-.  
– Use removal wedge from removal wedge set - VAS 895 015-  
to lever off cover -1- far enough to gain access to electrical  
connectors.  
– Disconnect electrical connectors.  
– Remove cover -1-.  
lk  
Installing  
Install in reverse order of removal, observing the following:  
Tightening torques  
♦ ⇒ Rep. gr. 70 ; Assembly overview - dash panel  
4.5  
Removing and installing loudspeaker  
trim  
Special tools and workshop equipment required  
♦ removal wedge set - VAS 895 015-  
Removing  
– Use removal wedge from removal wedge set - VAS 895 015-  
to lever off loudspeaker trim -1- starting from left side, and  
remove it.  
Installing  
Install in reverse order of removal.  
4.6  
Removing and installing dash panel  
Removal and installation are described for a left-hand drive  
vehicle as an example.  
4. Dash panel  
119  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
lk  
Removing  
– Remove dash panel insert - KX2- ⇒ Electrical system; Rep.  
gr. 90 ; Dash panel insert; Removing and installing dash  
panel insert [KX2] .  
– Remove display unit for front information display and operat‐  
ing unit control unit - J685- ⇒ Communication; Rep. gr. 91 ;  
Components/control units; Removing and installing display  
unit for front information display and operating unit control  
unit [J685] .  
– Remove steering column electronics control unit - J527-  
⇒ Electrical system; Rep. gr. 94 ; Steering column switch  
module; Removing and installing steering column electronics  
control unit [J527] .  
– Remove storage compartment for dash panel ⇒ Rep.  
gr. 70 ; Removing and installing storage compartment for  
dash panel .  
– Remove upper A-pillar trim at rear left and right ⇒ Rep.  
gr. 70 ; Removing and installing upper A-pillar trim .  
– Remove centre dash panel trims ⇒ Rep. gr. 70 ; Removing  
and installing centre dash panel trim .  
– Remove centre vent ⇒ Rep. gr. 70 ; Removing and instal‐  
ling steering centre vent .  
– Remove dash panel trim on driver side ⇒ Rep. gr. 68 ;  
Removing and installing dash panel trim on driver side .  
– Remove centre console ⇒ Rep. gr. 68 ; Removing and  
installing centre console .  
– Remove upper glove compartment ⇒ Rep. gr. 68 ; Remov‐  
ing and installing glove compartment .  
Vehicles with control unit for head-up display - J898-  
– Remove control unit for head-up display - J898- ⇒ Electrical  
system; Rep. gr. 90 ; Dash panel insert; Removing and  
installing control unit for head-up display  
All vehicles (continued)  
Vehicles with centre loudspeaker - R208-  
– Remove mounting for loudspeaker ⇒ Rep. gr. 70 ; Remov‐  
ing and installing mounting for loudspeaker .  
120  
Rep. gr.70 - Trim, insulation  
lk  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
All vehicles (continued)  
– Unscrew bolts -1-.  
– Unscrew bolts -1-.  
4. Dash panel  
121  
lk  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Unscrew bolts -1-.  
– Unscrew bolts -1-.  
– Move wiring harness clear.  
Important  
The aid of an additional person is required for the subse‐  
quent work steps.  
– Pull off dash panel -1- far enough for electrical connectors to  
become accessible.  
– Disconnect electrical connectors.  
– Remove dash panel -1-, and set it down on a soft surface.  
122  
Rep. gr.70 - Trim, insulation  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Installing  
Install in reverse order of removal, observing the following:  
– Connect electrical connectors until they engage audibly.  
– Make sure that no electrical wires are trapped.  
Tightening torques  
♦ ⇒ Rep. gr. 70 ; Assembly overview - dash panel  
♦ ⇒ Rep. gr. 69 ; Assembly overview – front passenger air‐  
bag  
4.7  
Removing and installing cover for dash  
panel/head-up display  
lk  
Special tools and workshop equipment required  
♦ removal wedge set - VAS 895 015-  
The cover for dash panel/head-up display will henceforth be  
referred to as “cover”.  
Removing  
– Lever off cover -1- using removal wedge from removal  
wedge set - VAS 895 015- , and remove it.  
Installing  
Install in reverse order of removal.  
4.8  
Removing and installing loudspeaker  
mounting  
Special tools and workshop equipment required  
♦ removal wedge set - VAS 895 015-  
4. Dash panel  
123  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Removing  
– Remove loudspeaker trim ⇒ Rep. gr. 70 ; Removing and  
installing loudspeaker trim .  
lk  
– Unscrew bolts -2-.  
– Use removal wedge from removal wedge set - VAS 895 015-  
to lever off loudspeaker mounting -1- far enough to gain  
access to electrical connector.  
– Disconnect electrical connector.  
– Remove mounting for loudspeaker -1-.  
Installing  
Install in reverse order of removal, observing the following:  
Tightening torques  
♦ ⇒ Rep. gr. 70 ; Assembly overview - dash panel  
4.9  
Removing and installing outer dash  
panel vents  
4.9.1  
Removing and installing outer dash  
panel vent, driver side  
Special tools and workshop equipment required  
♦ removal wedge set - VAS 895 015-  
124  
Rep. gr.70 - Trim, insulation  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Removing  
– Lever out outer dash panel vent on driver side -1- using  
removal wedge from removal wedge set - VAS 895 015- ,  
and remove it.  
lk  
Installing  
Install in reverse order of removal.  
4.9.2  
Removing and installing outer dash  
panel vents, front passenger side  
Special tools and workshop equipment required  
♦ removal wedge set - VAS 895 015-  
Removing  
– Remove upper glove compartment ⇒ Rep. gr. 68 ; Remov‐  
ing and installing glove compartment .  
– Lever out outer dash panel vent on front passenger side -1-  
using removal wedge from removal wedge set - VAS 895  
015- , and remove it.  
Installing  
Install in reverse order of removal.  
4.10  
Removing and installing trim for dash  
panel insert  
Special tools and workshop equipment required  
4. Dash panel  
125  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
♦ removal wedge set - VAS 895 015-  
Removing  
– Remove dash panel trims ⇒ Rep. gr. 70 ; Removing and  
installing dash panel trim .  
– Lever off dash panel insert trim -1- using removal wedge  
from removal wedge set - VAS 895 015- .  
– Unclip dash panel insert trim -1- from upper steering column  
trim, and remove it.  
Installing  
Install in reverse order of removal.  
4.11  
Removing and installing centre vent  
Special tools and workshop equipment required  
♦ removal wedge set - VAS 895 015-  
Removing  
– Remove lower centre dash panel trim ⇒ Rep. gr. 70 ; Re‐  
moving and installing centre dash panel trim .  
– Use removal wedge from removal wedge set - VAS 895 015-  
to lever off centre vent -1- far enough to gain access to  
electrical connector.  
– Disconnect electrical connector.  
– Remove centre vent -1-.  
126  
Rep. gr.70 - Trim, insulation  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Installing  
Install in reverse order of removal.  
4.12  
Removing and installing side defroster  
vent  
Removal and installation are described for left side of vehicle as  
an example.  
Removing  
– Remove dash panel end cover ⇒ Rep. gr. 70 ; Removing  
and installing dash panel end cover .  
– Unclip side defroster vent -1- using commercially available  
plastic wedge, and remove it.  
lk  
Installing  
Install in reverse order of removal.  
4.13  
Removing and installing centre dash  
panel cover  
4.13.1  
Removing and installing centre dash  
panel cover, top  
Special tools and workshop equipment required  
♦ removal pliers - 3392-  
♦ removal wedge set - VAS 895 015-  
The upper centre dash panel cover will henceforth be referred  
to as “dash panel cover”.  
Removing  
4. Dash panel  
127  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Vehicles with control unit for head-up display - J898-  
– Remove cover for dash panel/head-up display ⇒ Rep.  
gr. 70 ; Removing and installing cover for dash panel/head-  
up display .  
All vehicles (continued)  
– Remove upper A-pillar trims at front ⇒ Rep. gr. 70 ; Remov‐  
ing and installing upper A-pillar trim .  
lk  
– Unscrew bolts -2- on left and right.  
– Mask off dash panel in area of dash panel cover -1- using  
commercially available adhesive tape.  
– Use removal wedge from removal wedge set - VAS 895 015-  
to slightly lift up dash panel cover -1-, and fit removal pliers -  
3392- in area marked with -arrow-.  
– Use removal pliers - 3392- to lever off dash panel cover -1-  
starting from left.  
– Pull dash panel cover -1- out of mountings -3- far enough to  
gain access to electrical connector.  
– Disconnect electrical connector.  
– Remove dash panel trim -1-.  
Installing  
Install in reverse order of removal, observing the following:  
Tightening torques  
♦ ⇒ Rep. gr. 70 ; Assembly overview - dash panel  
4.13.2  
Removing and installing centre dash  
panel cover, bottom  
Special tools and workshop equipment required  
♦ removal wedge set - VAS 895 015-  
The lower centre dash panel cover will henceforth be referred to  
as “dash panel cover”.  
Removal and installation are described for a left-hand drive  
vehicle as an example.  
128  
Rep. gr.70 - Trim, insulation  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Removing  
– Remove dash panel end cover on front passenger side  
⇒ Rep. gr. 70 ; Removing and installing dash panel end  
cover .  
– Use removal wedge from removal wedge set - VAS 895 015-  
to lever off dash panel cover -1- far enough to gain access to  
electrical connector.  
– Disconnect electrical connector.  
– Remove dash panel trim -1-.  
lk  
Installing  
Install in reverse order of removal, observing the following:  
– Clip in dash panel cover starting from left.  
4.14  
Removing and installing dash panel  
storage compartment  
Removing  
– Open storage compartment for dash panel -2-.  
– Remove lining mat -1-.  
– Unscrew bolts -3-.  
4. Dash panel  
129  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Remove storage compartment for dash panel -1- in direction  
of -arrow-.  
Installing  
Install in reverse order of removal, observing the following:  
lk  
Tightening torques  
♦ ⇒ Rep. gr. 70 ; Assembly overview - dash panel  
130  
Rep. gr.70 - Trim, insulation  

Related Topics