Trim,insulation -> Removing and installing dash panel end cover for Your Volkswagen Multivan SUV Seventh Generation (2024-2025)

Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
14 - Dash panel insert trim  
❑ ⇒ Rep. gr. 70 ; Removing and installing trim for dash panel insert  
15 - Dash panel trim panel  
❑ Driver side  
❑ ⇒ Rep. gr. 70 ; Removing and installing dash panel trim  
16 - Outer dash panel vents  
❑ ⇒ Rep. gr. 70 ; Removing and installing outer dash panel vents  
17 - Dash panel  
❑ ⇒ Rep. gr. 70 ; Removing and installing dash panel  
lk  
18 - Dash panel end cover  
❑ Driver side  
❑ ⇒ Rep. gr. 70 ; Removing and installing dash panel end cover  
19 - Side defroster vent  
❑ ⇒ Rep. gr. 70 ; Removing and installing side defroster vent  
Dash panel – specified torque and tightening sequence  
Bolts  
Specified torque/turning fur‐  
ther angle  
-1- through -14-  
1.5 Nm  
4.2  
Removing and installing dash panel  
end cover  
4.2.1  
Removing and installing dash panel  
end cover, driver side  
Removal and installation are described for a left-hand drive  
vehicle as an example.  
4. Dash panel  
115  
lk  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Removing  
– Release retaining clips -2- using a commercially available  
plastic wedge, and remove dash panel end cover -1-.  
Installing  
Install in reverse order of removal, observing the following:  
– Restore sealing lip of door seal to installation position.  
4.2.2  
Removing and installing dash panel  
end cover, front passenger side  
Removal and installation are described for a left-hand drive  
vehicle as an example.  
Removing  
– Release retaining clips -3- with a commercially available  
plastic wedge, and pull off dash panel end cover -1- far  
enough to gain access to electrical connector.  
– Disconnect electrical connector -2-.  
– Remove dash panel end cover -1-.  
116  
Rep. gr.70 - Trim, insulation  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Installing  
Install in reverse order of removal, observing the following:  
lk  
– Restore sealing lip of door seal to installation position.  
4.3  
Removing and installing dash panel  
trim  
4.3.1  
Removing and installing dash panel  
trim, driver side  
Special tools and workshop equipment required  
♦ removal wedge set - VAS 895 015-  
The dash panel trim on driver side will henceforth be referred to  
as “trim panel”.  
Removal and installation are described for a left-hand drive  
vehicle as an example.  
Removing  
– Lever off trim panel -1- using removal wedge from removal  
wedge set - VAS 895 015- , and remove it.  
Installing  
Install in reverse order of removal.  
4.3.2  
Removing and installing dash panel  
trim, passenger side  
Special tools and workshop equipment required  
♦ removal wedge set - VAS 895 015-  
The dash panel trim on front passenger side will henceforth be  
referred to as “trim panel”.  
Removal and installation are described for a left-hand drive  
vehicle as an example.  
4. Dash panel  
117  

Related Topics