Trim,insulation -> Interior trims for Your Volkswagen Multivan SUV Seventh Generation (2024-2025)

Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
6
Interior trims  
6.1  
Assembly overview – A-pillar trim  
The overview shows the left side of a left-hand drive vehicle as  
an example. For right-hand drive vehicles, the layout is a mirror  
image.  
1 - Upper A-pillar trim  
❑ Rear  
❑ ⇒ Rep. gr. 70 ; Re‐  
moving and installing  
upper A-pillar trim, rear  
2 - Upper A-pillar trim  
❑ Front  
❑ ⇒ Rep. gr. 70 ; Re‐  
moving and installing  
upper A-pillar trim, front  
3 - Upper A-pillar trim  
❑ Trim  
❑ ⇒ Rep. gr. 70 ; Re‐  
moving and installing  
upper A-pillar trim, trim  
panel  
4 - A-pillar gap cover  
❑ ⇒ Rep. gr. 70 ; Re‐  
moving and installing  
A-pillar gap cover  
5 - Lower A-pillar trim  
❑ ⇒ Rep. gr. 70 ; Re‐  
moving and installing  
lower A-pillar trim  
6 - Bonnet lock operating lev‐  
er  
❑ ⇒ General body re‐  
pairs, exterior; Rep.  
gr. 55 ; Bonnet; Re‐  
moving and installing  
bonnet lock release lev‐  
er  
6.2  
Assembly overview – B-pillar trim  
The overview shows the left side of a left-hand drive vehicle as  
an example. For right-hand drive vehicles, the layout is a mirror  
image.  
6. Interior trims  
137  
lk  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
1 - Coat hook  
❑ Only to be renewed  
along with retaining  
loop  
2 - Bolt  
❑ Qty. 2  
❑ 8 Nm  
3 - Retaining loop  
4 - Retaining loop bracket  
❑ ⇒ Rep. gr. 70 ; Re‐  
moving and installing  
upper B-pillar trim  
5 - Bolt  
❑ Qty. 3  
❑ 8 Nm  
6 - Guide  
❑ For curtain airbag  
❑ ⇒ Rep. gr. 70 ; Re‐  
moving and installing  
upper B-pillar trim  
7 - Bolt  
❑ 2 Nm  
8 - Grab handle bracket  
❑ ⇒ Rep. gr. 68 ; Re‐  
moving and installing  
grab handle bracket  
9 - Bolt  
❑ 8 Nm  
10 - Upper part of B-pillar trim  
❑ ⇒ Rep. gr. 70 ; Re‐  
moving and installing upper B-pillar trim  
11 - Left sliding door button 2 - E732-  
❑ Depending on equipment/installation period  
❑ ⇒ Electrical system; Rep. gr. 96 ; Controls; Removing and installing sliding door button 2 [E732]/  
[E733]  
12 - Lower B-pillar trim  
❑ ⇒ Rep. gr. 70 ; Removing and installing lower B-pillar trim  
13 - Belt tensioner cover  
❑ ⇒ Rep. gr. 70 ; Removing and installing lower B-pillar trim  
6.3  
Assembly overview – C-pillar trim  
The overview is shown for the left side of the vehicle as an  
example.  
138  
Rep. gr.70 - Trim, insulation  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
lk  
1 - Guide  
❑ For curtain airbag  
❑ ⇒ Rep. gr. 70 ; Re‐  
moving and installing  
C-pillar trim  
2 - C-pillar trim  
❑ ⇒ Rep. gr. 70 ; Re‐  
moving and installing  
C-pillar trim  
6.4  
Assembly overview – side trim  
Assembly overview - side trim  
6.4.1  
The overview is shown for the left side of the vehicle as an  
example.  
6. Interior trims  
139  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
1 - Belt exit point trim  
2 - Side trim  
❑ ⇒ Rep. gr. 70 ; Re‐  
moving and installing  
side trim  
3 - Bolt  
❑ Qty. 2  
❑ 3 Nm  
4 - Electric torch  
❑ Depending on equip‐  
ment/installation period  
5 - Trim  
❑ Depending on equip‐  
ment/installation period  
6 - Lock carrier trim  
❑ ⇒ Rep. gr. 70 ; Re‐  
moving and installing  
lock carrier trim  
7 - Bolt  
❑ Qty. 2  
❑ 20 Nm  
8 - Fastening ring  
❑ Qty. 2  
❑ ⇒ Rep. gr. 70 ; Re‐  
moving and installing  
fastening rings  
9 - Luggage/load compart‐  
ment floor holder  
❑ Depending on equip‐  
ment/installation period  
❑ ⇒ Rep. gr. 70 ; Re‐  
moving and installing side trim  
10 - Bolt  
❑ Qty. 3  
❑ 8 Nm  
6.4.2  
Assembly overview – side trim, vehicles with bed frame  
The overview is shown for the left side of the vehicle as an  
example.  
140  
Rep. gr.70 - Trim, insulation  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
lk  
1 - Belt exit point trim  
2 - Side trim  
❑ ⇒ Rep. gr. 70 ; Re‐  
moving and installing  
side trim  
3 - Trim collar  
❑ Outer section  
4 - Electric torch  
❑ Depending on equip‐  
ment/installation period  
5 - Trim  
❑ Depending on equip‐  
ment/installation period  
6 - Lock carrier trim  
❑ ⇒ Rep. gr. 70 ; Re‐  
moving and installing  
lock carrier trim  
7 - Fastening ring  
❑ Qty. 2  
❑ ⇒ Rep. gr. 70 ; Re‐  
moving and installing  
fastening rings  
8 - Bolt  
❑ Qty. 2  
❑ 20 Nm  
9 - Bed frame holder  
❑ ⇒ Rep. gr. 70 ; Re‐  
moving and installing  
side trim  
10 - Bolt  
❑ Qty. 3  
❑ Renew after removing  
❑ 10 Nm  
11 - Trim collar  
❑ Inner part  
6.5  
Assembly overview – foot rest and floor  
covering  
6.5.1  
Assembly overview - foot rest and floor covering, short overhang  
The overview shows a left-hand drive vehicle as an example.  
For right-hand drive vehicles, the layout is a mirror image.  
6. Interior trims  
141  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
1 - Button  
❑ Qty. 2  
2 - Front floor covering  
❑ Depending on equip‐  
ment/installation period  
❑ ⇒ Rep. gr. 70 ; Re‐  
moving and installing  
floor covering  
3 - Cover strip  
4 - Rear footwell vent  
❑ ⇒ Heating, air condi‐  
tioning; Rep. gr. 87 ;  
Air duct; Removing and  
installing rear footwell  
vent  
5 - Seat rails  
❑ ⇒ Rep. gr. 72 ; As‐  
sembly overview – seat  
rails  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
seat rails  
6 - Rear floor covering  
❑ Depending on equip‐  
ment/installation period  
❑ ⇒ Rep. gr. 70 ; Re‐  
moving and installing  
floor covering  
7 - Button  
8 - Foot rest  
❑ ⇒ Rep. gr. 70 ; Re‐  
moving and installing  
foot rest  
6.5.2  
Assembly overview - foot rest and floor covering, long overhang  
The overview shows a left-hand drive vehicle as an example.  
For right-hand drive vehicles, the layout is a mirror image.  
142  
Rep. gr.70 - Trim, insulation  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
1 - Button  
❑ Qty. 2  
2 - Front floor covering  
❑ Depending on equip‐  
ment/installation period  
❑ ⇒ Rep. gr. 70 ; Re‐  
moving and installing  
floor covering  
3 - Cover strip  
4 - Rear footwell vent  
❑ ⇒ Heating, air condi‐  
tioning; Rep. gr. 87 ;  
Air duct; Removing and  
installing rear footwell  
vent  
5 - Seat rails  
❑ ⇒ Rep. gr. 72 ; As‐  
sembly overview – seat  
rails  
❑ ⇒ Rep. gr. 72 ; Re‐  
moving and installing  
seat rails  
6 - Rear floor covering  
❑ Depending on equip‐  
ment/installation period  
❑ ⇒ Rep. gr. 70 ; Re‐  
moving and installing  
floor covering  
7 - Button  
8 - Foot rest  
❑ ⇒ Rep. gr. 70 ; Re‐  
moving and installing  
foot rest  
6.6  
Removing and installing front sill panel  
moulding  
6.6.1  
Removing and installing front sill panel  
moulding, step insert  
Removal and installation are described for the left side of vehi‐  
cle as an example.  
Removing  
– Remove lower A-pillar trim ⇒ Rep. gr. 70 ; Removing and  
installing lower A-pillar trim .  
– Remove lower B-pillar trim ⇒ Rep. gr. 70 ; Removing and  
installing lower B-pillar trim .  
6. Interior trims  
143  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Expose inner door seal in area of step insert -1-.  
– Unclip step insert -1- using commercially available plastic  
wedge, and detach it.  
lk  
Installing  
Install in reverse order of removal, observing the following:  
– Make sure that step insert is located in the beading of the  
inner door seal.  
6.6.2  
Removing and installing front step in‐  
sert, step reinforcement  
Removal and installation are described for the left side of vehi‐  
cle as an example.  
Removing  
– Remove front step insert ⇒ Rep. gr. 70 ; Removing and  
installing front sill panel moulding, step insert .  
– Remove seat frame of front seat ⇒ Rep. gr. 72 ; Removing  
and installing front seat, seat frame .  
– Unclip step reinforcement -1- using commercially available  
plastic wedge, and detach it.  
144  
Rep. gr.70 - Trim, insulation  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Installing  
Install in reverse order of removal.  
6.7  
Removing and installing rear sill panel  
moulding  
6.7.1  
Removing and installing rear sill panel lk  
moulding, step insert  
Removal and installation are described for the left side of vehi‐  
cle as an example.  
Removing  
– Remove lower B-pillar trim ⇒ Rep. gr. 70 ; Removing and  
installing lower B-pillar trim .  
– Remove side trim ⇒ Rep. gr. 70 ; Removing and installing  
side trim .  
– Unclip step insert -1- using commercially available plastic  
wedge, and detach it.  
Installing  
Install in reverse order of removal.  
6.7.2  
Removing and installing rear step in‐  
sert, step reinforcement  
Removal and installation are described for left side of vehicle as  
an example.  
Removing  
– Remove step insert ⇒ Rep. gr. 70 ; Removing and installing  
rear sill panel moulding, step insert .  
– Remove rear floor covering ⇒ Rep. gr. 70 ; Removing and  
installing rear floor covering .  
6. Interior trims  
145  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Unclip step reinforcement -1- using commercially available  
plastic wedge, and detach it.  
lk  
Installing  
Install in reverse order of removal.  
Tightening torques  
6.8  
Removing and installing upper A-pillar  
trim  
6.8.1  
Removing and installing upper A-pillar  
trim, front  
Special tools and workshop equipment required  
♦ wedge - T10383-  
Removal and installation are described for left side of vehicle as  
an example.  
Removing  
– Remove trim panel of A-pillar trim ⇒ Rep. gr. 70 ; Remov‐  
ing and installing upper A-pillar trim .  
146  
Rep. gr.70 - Trim, insulation  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Release retaining clips -2- using wedge - T10383- .  
– Pull off upper front A-pillar trim -1- far enough to gain access  
to electrical connector.  
– Disconnect electrical connector.  
– Remove upper front A-pillar trim -1-.  
Installing  
Install in reverse order of removal.  
6.8.2  
Removing and installing upper A-pillar  
trim, rear  
Special tools and workshop equipment required  
♦ wedge - T10383-  
Removal and installation are described for left side of vehicle as  
an example.  
Removing  
lk  
– Remove upper front A-pillar trim ⇒ Rep. gr. 70 ; Removing  
and installing upper front A-pillar trim .  
– Use wedge - T10383- to release retaining clips -2-, and re‐  
move upper rear A-pillar trim -1-.  
Installing  
Install in reverse order of removal, observing the following:  
6. Interior trims  
147  
lk  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Bring sealing lip of inner door seal into installation position.  
6.8.3  
Removing and installing upper A-pillar  
trim, trim panel  
Removal and installation are described for left side of vehicle as  
an example.  
Removing  
– Lever out upper A-pillar trim -1- using commercially available  
plastic wedge, and remove it.  
Installing  
Install in reverse order of removal.  
6.9  
Removing and installing lower A-pillar  
trim  
Special tools and workshop equipment required  
♦ removal tool - T40280-  
♦ wedge - T10383-  
Removal and installation are described for a left-hand drive  
vehicle as an example.  
Removing  
– Remove A-pillar gap cover ⇒ Rep. gr. 70 ; Removing and  
installing A-pillar gap cover .  
– Remove bonnet lock release lever ⇒ General body repairs,  
exterior; Rep. gr. 55 ; Bonnet; Removing and installing bon‐  
net lock release lever .  
148  
Rep. gr.70 - Trim, insulation  
lk  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Use wedge - T10383- to release retaining clips -2-, and re‐  
move lower A-pillar trim -1-.  
Installing  
Install in reverse order of removal, observing the following:  
– Remove retaining clip left in body using removal tool -  
T40280- , and insert into lower A-pillar trim.  
– Bring sealing lip of door seal into installation position.  
6.10  
Removing and installing A-pillar gap  
cover  
Removal and installation are described for left side of vehicle as  
an example.  
Removing  
– Remove dash panel end cover ⇒ Rep. gr. 70 ; Removing  
and installing dash panel end cover .  
– Unclip A-pillar gap cover -1- using commercially available  
plastic wedge, and remove it.  
6. Interior trims  
149  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Installing  
Install in reverse order of removal, observing the following:  
– Bring sealing lip of door seal into installation position.  
6.11  
Removing and installing upper B-pillar  
trim  
6.11.1  
Removing and installing upper B-pillar  
trim  
Special tools and workshop equipment required  
♦ removal tool - T40280-  
♦ wedge - T10383-  
lk  
Removal and installation are described for left side of vehicle as  
an example.  
Removing  
– Disconnect battery earth cable ⇒ Electrical system; Rep.  
gr. 27 ; Battery; Disconnecting and connecting battery .  
– Remove belt tensioner cover ⇒ Rep. gr. 70 ; Removing and  
installing lower B-pillar trim .  
– Unclip coat hook -1-.  
– Unscrew bolts -2-, and remove retaining loop -3-.  
150  
Rep. gr.70 - Trim, insulation  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Unclip upper B-pillar trim -1- at side using wedge - T10383- ,  
and remove it.  
lk  
CAUTION  
It is possible to trigger pyrotechnic components unintentional‐  
ly.  
Risk of injury  
– Discharge static electricity by briefly touching door striker  
plate.  
NOTICE  
Risk of irreparable damage due to electrostatic discharge.  
– Do not touch connector contacts with your hands.  
– Touch the lifting platform or other earthed object to dis‐  
charge static electricity.  
– Disconnect electrical connector -2-, releasing securing clip  
with a small commercially available screwdriver when doing  
so.  
– Unscrew bolts -3-.  
– Guide seat belt with lap belt tensioner -- out of upper B-pillar  
trim.  
Installing  
Install in reverse order of removal, observing the following:  
– Remove any retaining clips left in body using removal tool -  
T40280- , and insert retaining clips into upper B-pillar trim.  
– Make sure that belt height adjuster functions correctly.  
– Bring sealing lip of door seal into installation position.  
6. Interior trims  
151  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Connect battery earth cable ⇒ Electrical system; Rep.  
gr. 27 ; Battery; Disconnecting and connecting battery .  
CAUTION  
Pyrotechnic components can trigger unintentionally.  
Risk of injury.  
– Keep far away from pyrotechnic components when switch‐  
ing on ignition.  
– Switch on ignition.  
Tightening torques  
♦ ⇒ Rep. gr. 70 ; Assembly overview – B-pillar trim  
lk  
6.11.2  
Removing and installing upper B-pillar  
trim, retaining loop bracket  
Removal and installation are described for left side of vehicle as  
an example.  
Removing  
– Release upper B-pillar trim ⇒ Rep. gr. 70 ; Removing and  
installing upper B-pillar trim .  
Note  
The upper B-pillar trim remains attached to three-point seat belt.  
– Unscrew bolts -2-, and remove retaining loop bracket -1-.  
Installing  
Install in reverse order of removal, observing the following:  
152  
Rep. gr.70 - Trim, insulation  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Tightening torques  
♦ ⇒ Rep. gr. 70 ; Assembly overview – B-pillar trim  
6.11.3  
Removing and installing upper B-pillar  
trim, guide for curtain airbag  
Removal and installation are described for left side of vehicle as  
an example.  
Removing  
– Remove front moulded headliner ⇒ Rep. gr. 70 ; Removing  
and installing moulded headliner .  
– Unscrew bolt -2-, and remove guide for curtain airbag -1-.  
lk  
Installing  
Install in reverse order of removal, observing the following:  
Tightening torques  
♦ ⇒ Rep. gr. 70 ; Assembly overview – B-pillar trim  
6.12  
Removing and installing lower B-pillar  
trim  
6.12.1  
Removing and installing lower B-pillar  
trim  
Special tools and workshop equipment required  
♦ removal tool - T40280-  
♦ wedge - T10383-  
Removal and installation are described for left side of vehicle as  
an example.  
6. Interior trims  
153  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Removing  
– Remove upper B-pillar trim ⇒ Rep. gr. 70 ; Removing and  
installing upper B-pillar trim .  
lk  
– Use wedge - T10383- to release retaining clips -2-, and re‐  
move B-pillar trim -1-.  
Vehicles with left sliding door button 2 - E732-  
– Disconnect electrical connector.  
All vehicles (continued)  
Installing  
Install in reverse order of removal, observing the following:  
– Remove retaining clips left in body using removal tool -  
T40280- , and insert them into lower B-pillar trim.  
– Bring sealing lip of door seal into installation position.  
6.12.2  
Removing and installing lower B-pillar  
trim, belt tensioner cover  
Removal and installation are described for left side of vehicle as  
an example.  
154  
Rep. gr.70 - Trim, insulation  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Removing  
– Lever off belt tensioner cover -1- using commercially availa‐  
ble plastic wedge, and remove it.  
Installing  
Install in reverse order of removal.  
lk  
6.13  
Removing and installing C-pillar trim  
6.13.1  
Removing and installing C-pillar trim  
Special tools and workshop equipment required  
♦ removal tool - T40280-  
♦ wedge - T10383-  
Removal and installation are described for left side of vehicle as  
an example.  
Removing  
– Unscrew bolt -2-, and remove belt end fitting -1-.  
6. Interior trims  
155  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Use wedge - T10383- to release retaining clips -2-, and re‐  
move C-pillar trim -1-.  
– Guide seat belt out of C-pillar trim -1-.  
Installing  
Install in reverse order of removal, observing the following:  
– Remove retaining clips left in body using removal tool -  
T40280- , and insert them into C-pillar trim.  
– Bring sealing lip of door seal into installation position.  
Tightening torques  
♦ ⇒ Rep. gr. 69 ; Assembly overview – rear outer three-point  
seat belt  
lk  
6.13.2  
Removing and installing C-pillar trim,  
guide for curtain airbag  
Special tools and workshop equipment required  
♦ removal tool - T40280-  
♦ wedge - T10383-  
Removal and installation are described for left side of vehicle as  
an example.  
Removing  
– Remove rear moulded headliner ⇒ Rep. gr. 70 ; Removing  
and installing moulded headliner .  
156  
Rep. gr.70 - Trim, insulation  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Use wedge - T10383- to release retaining clips -2-, and re‐  
lk  
move guide for curtain airbag -1-.  
Installing  
Install in reverse order of removal, observing the following:  
– Remove any retaining clips left in body using removal tool -  
T40280- , and insert them into guide for curtain airbag.  
6.14  
Removing and installing D-pillar trim  
Special tools and workshop equipment required  
♦ removal tool - T40280-  
♦ wedge - T10383-  
Removal and installation are described for left side of vehicle as  
an example.  
Removing  
– Use wedge - T10383- to release retaining clips -1-, and re‐  
move D-pillar trim -2-.  
Installing  
Install in reverse order of removal, observing the following:  
6. Interior trims  
157  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Remove retaining clips left in body using removal tool -  
T40280- , and insert them into D-pillar trim.  
– Bring sealing lip of rear lid seal into installation position.  
6.15  
Removing and installing side trim  
6.15.1  
Removing and installing side trim  
Special tools and workshop equipment required  
♦ wedge - T10383-  
Removal and installation are described for left side of vehicle as  
an example.  
Removing  
– Remove C-pillar trim ⇒ Rep. gr. 70 ; Removing and instal‐  
ling C-pillar trim .  
– Remove D-pillar trim ⇒ Rep. gr. 70 ; Removing and instal‐  
ling D pillar trim .  
– Remove lock carrier trim ⇒ Rep. gr. 70 ; Removing and  
installing lock carrier trim .  
– Remove individual seats ⇒ Rep. gr. 72 ; Removing and  
installing individual seats .  
– Unclip belt exit point trim.  
lk  
– Unscrew bolt -2-, and remove belt end fitting -1-.  
158  
Rep. gr.70 - Trim, insulation  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
lk  
– Unscrew bolts -3-.  
– Use wedge - T10383- to release clips -2-.  
– Pull off side trim -1- far enough to gain access to electrical  
connectors.  
– Disconnect electrical connectors.  
– Remove side trim -1-.  
Installing  
Install in reverse order of removal, observing the following:  
– Turn locking mechanism from position -2- to position -1-.  
Important  
•
The side trim can only be installed when the locking mecha‐  
nism is in position -1-.  
– Bring sealing lip of rear lid seal into installation position.  
Tightening torques  
♦ ⇒ Rep. gr. 70 ; Assembly overview - side trim  
♦ ⇒ Rep. gr. 69 ; Assembly overview – rear outer three-point  
seat belt  
6.15.2  
Removing and installing side trim,  
loading floor/bed frame holder  
Removal and installation are described for left side of vehicle as  
an example.  
6. Interior trims  
159  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Removing  
– Remove side trim ⇒ Rep. gr. 70 ; Removing and installing  
side trim .  
– Unscrew bolts -2-, and remove loading floor/bed frame  
bracket -1-.  
Installing  
Install in reverse order of removal, observing the following:  
lk  
Tightening torques  
♦ ⇒ Rep. gr. 70 ; Assembly overview - side trim  
6.16  
Removing and installing floor covering  
6.16.1  
Removing and installing floor covering,  
front  
Removal and installation are described for a left-hand drive  
vehicle with long overhang as an example.  
Removing  
– Remove seat frames ⇒ Rep. gr. 72 ; Removing and instal‐  
ling front seat .  
– Remove front step insert ⇒ Rep. gr. 70 ; Removing and  
installing front sill panel moulding .  
– Remove centre console ⇒ Rep. gr. 68 ; Removing and  
installing centre console .  
160  
Rep. gr.70 - Trim, insulation  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Lever out cover strip -1-, and remove it.  
lk  
– Unscrew buttons -1-.  
– Lift floor covering -2- and pull it towards rear.  
NOTICE  
Risk of damage to the floor covering caused by tearing at  
cut-outs.  
– Carefully remove floor covering.  
– Remove floor covering -2-.  
Installing  
Install in reverse order of removal.  
6.16.2  
Removing and installing floor covering,  
rear  
Removal and installation are described for a vehicle with long  
overhang as an example.  
Removing  
– Remove seat frames ⇒ Rep. gr. 72 ; Removing and instal‐  
ling front seat .  
– Remove lock carrier trim ⇒ Rep. gr. 70 ; Removing and  
installing lock carrier trim .  
– Remove rear step insert ⇒ Rep. gr. 70 ; Removing and  
installing rear sill panel moulding .  
– Remove seat rails ⇒ Rep. gr. 72 ; Removing and installing  
seat rails .  
– Remove rear footwell vent ⇒ Heating, air conditioning; Rep.  
gr. 87 ; Air duct system; Removing and installing rear foot‐  
well vent .  
6. Interior trims  
161  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
lk  
– Lever out cover strip -1-, and remove it.  
Important  
•
The aid of an additional person is required for the subse‐  
quent work steps.  
– Remove floor covering towards rear.  
Installing  
Install in reverse order of removal.  
6.17  
Removing and installing foot rest  
6.17.1  
Removing and installing foot rest, left-  
hand drive vehicle  
Removing  
– Remove front floor covering ⇒ Rep. gr. 70 ; Removing and  
installing floor covering .  
– Remove push button -2-.  
– Remove foot rest -1-.  
162  
Rep. gr.70 - Trim, insulation  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Installing  
Install in reverse order of removal.  
6.17.2  
Removing and installing foot rest, RHD  
vehicles  
Removing  
– Remove front floor covering ⇒ Rep. gr. 70 ; Removing and  
installing floor covering .  
– Remove push button -2-.  
– Remove foot rest -1-.  
lk  
Installing  
Install in reverse order of removal.  
6. Interior trims  
163  

Related Topics

Trim,insulation

Safety information and repair notes
Safety information
Repair instructions
Front door trims
Assembly overview ? front door trim
Removing and installing trim
Removing and installing front door trim
Removing and installing mirror cover trim
Removing and installing button/switch trim
Rear door trims
Assembly overview ? rear door trim
Removing and installing interior door handle
Removing and installing rear door trim
Removing and installing window frame trim
Dash panel
Assembly overview - dash panel
Removing and installing dash panel end cover
Removing and installing dash panel trim
Removing and installing cover for MMI screen
Removing and installing loudspeaker trim
Removing and installing dash panel
Removing and installing cover for dash panel/head-up display
Removing and installing loudspeaker mounting
Removing and installing outer dash panel vents
Removing and installing trim for dash panel insert
Removing and installing centre vent
Removing and installing side defroster vent
Removing and installing centre dash panel cover
Removing and installing dash panel storage compartment
Central tube for dash panel
Assembly overview ? dash panel cross member
Removing and installing dash panel cross member
Removing and installing crash bar
Assembly overview ? A-pillar trim
Assembly overview ? B-pillar trim
Assembly overview ? C-pillar trim
Assembly overview ? side trim
Assembly overview ? foot rest and floor covering
Removing and installing front sill panel moulding
Removing and installing rear sill panel moulding
Removing and installing upper A-pillar trim
Removing and installing lower A-pillar trim
Removing and installing A-pillar gap cover
Removing and installing upper B-pillar trim
Removing and installing lower B-pillar trim
Removing and installing C-pillar trim
Removing and installing D-pillar trim
Removing and installing side trim
Removing and installing floor covering
Removing and installing foot rest
Luggage compartment trims
Assembly overview ? lower rear lid trim
Removing and installing lower rear lid trim
Removing and installing lock carrier trim
Removing and installing fastening rings
Roof trims
Assembly overview ? moulded headliner
Removing and installing roof end strip
Removing and installing moulded headliner

Popular Owner Manuals

Audi
BMW
Citroen
Ford
Honda
Peugeot

Latest Owner Manuals

Second Generation (2013-2020) Ford Fusion 4 Door Second Generation (2013-2020) Ford Fusion 4 Door
First Generation (2006-2012) Ford Fusion 4 Door First Generation (2006-2012) Ford Fusion 4 Door
Third Generation (2016-2023) Ford Galaxy Van Third Generation (2016-2023) Ford Galaxy Van
Second Generation (2007-2015) Ford Galaxy Van Second Generation (2007-2015) Ford Galaxy Van
First Generation (1995-2006) Ford Galaxy Van First Generation (1995-2006) Ford Galaxy Van
Second Generation (2013-2023) Ford Ecosport SUV Second Generation (2013-2023) Ford Ecosport SUV