Trim,insulation -> Removing and installing dash panel for Your Volkswagen Multivan SUV Seventh Generation (2024-2025)

Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Unscrew bolt -2-.  
– Use removal wedge from removal wedge set - VAS 895 015-  
to lever off cover -1- far enough to gain access to electrical  
connectors.  
– Disconnect electrical connectors.  
– Remove cover -1-.  
lk  
Installing  
Install in reverse order of removal, observing the following:  
Tightening torques  
♦ ⇒ Rep. gr. 70 ; Assembly overview - dash panel  
4.5  
Removing and installing loudspeaker  
trim  
Special tools and workshop equipment required  
♦ removal wedge set - VAS 895 015-  
Removing  
– Use removal wedge from removal wedge set - VAS 895 015-  
to lever off loudspeaker trim -1- starting from left side, and  
remove it.  
Installing  
Install in reverse order of removal.  
4.6  
Removing and installing dash panel  
Removal and installation are described for a left-hand drive  
vehicle as an example.  
4. Dash panel  
119  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
lk  
Removing  
– Remove dash panel insert - KX2- ⇒ Electrical system; Rep.  
gr. 90 ; Dash panel insert; Removing and installing dash  
panel insert [KX2] .  
– Remove display unit for front information display and operat‐  
ing unit control unit - J685- ⇒ Communication; Rep. gr. 91 ;  
Components/control units; Removing and installing display  
unit for front information display and operating unit control  
unit [J685] .  
– Remove steering column electronics control unit - J527-  
⇒ Electrical system; Rep. gr. 94 ; Steering column switch  
module; Removing and installing steering column electronics  
control unit [J527] .  
– Remove storage compartment for dash panel ⇒ Rep.  
gr. 70 ; Removing and installing storage compartment for  
dash panel .  
– Remove upper A-pillar trim at rear left and right ⇒ Rep.  
gr. 70 ; Removing and installing upper A-pillar trim .  
– Remove centre dash panel trims ⇒ Rep. gr. 70 ; Removing  
and installing centre dash panel trim .  
– Remove centre vent ⇒ Rep. gr. 70 ; Removing and instal‐  
ling steering centre vent .  
– Remove dash panel trim on driver side ⇒ Rep. gr. 68 ;  
Removing and installing dash panel trim on driver side .  
– Remove centre console ⇒ Rep. gr. 68 ; Removing and  
installing centre console .  
– Remove upper glove compartment ⇒ Rep. gr. 68 ; Remov‐  
ing and installing glove compartment .  
Vehicles with control unit for head-up display - J898-  
– Remove control unit for head-up display - J898- ⇒ Electrical  
system; Rep. gr. 90 ; Dash panel insert; Removing and  
installing control unit for head-up display  
All vehicles (continued)  
Vehicles with centre loudspeaker - R208-  
– Remove mounting for loudspeaker ⇒ Rep. gr. 70 ; Remov‐  
ing and installing mounting for loudspeaker .  
120  
Rep. gr.70 - Trim, insulation  
lk  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
All vehicles (continued)  
– Unscrew bolts -1-.  
– Unscrew bolts -1-.  
4. Dash panel  
121  
lk  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
– Unscrew bolts -1-.  
– Unscrew bolts -1-.  
– Move wiring harness clear.  
Important  
The aid of an additional person is required for the subse‐  
quent work steps.  
– Pull off dash panel -1- far enough for electrical connectors to  
become accessible.  
– Disconnect electrical connectors.  
– Remove dash panel -1-, and set it down on a soft surface.  
122  
Rep. gr.70 - Trim, insulation  
Multivan 2025 ➤ , Multivan 2022 ➤  
General body repairs, interior - Edition 09.2024  
Installing  
Install in reverse order of removal, observing the following:  
– Connect electrical connectors until they engage audibly.  
– Make sure that no electrical wires are trapped.  
Tightening torques  
♦ ⇒ Rep. gr. 70 ; Assembly overview - dash panel  
♦ ⇒ Rep. gr. 69 ; Assembly overview – front passenger air‐  
bag  
4.7  
Removing and installing cover for dash  
panel/head-up display  
lk  
Special tools and workshop equipment required  
♦ removal wedge set - VAS 895 015-  
The cover for dash panel/head-up display will henceforth be  
referred to as “cover”.  
Removing  
– Lever off cover -1- using removal wedge from removal  
wedge set - VAS 895 015- , and remove it.  
Installing  
Install in reverse order of removal.  
4.8  
Removing and installing loudspeaker  
mounting  
Special tools and workshop equipment required  
♦ removal wedge set - VAS 895 015-  
4. Dash panel  
123  

Related Topics